Optus FetchTv GEN 1 User Manual page 25

Optus TV USER GUIDE > MY STUFF
SERIES TAGS
You can Series Tag and record an entire series without having to set individual recordings. Your set-top box will
recognise each new episode of the series that appears in the EPG and will automatically record it (unless it has
previously been recorded) – very handy.
Here are a few important things to keep in mind when using and scheduling Series Tags:
1. Series Tags are listed in order of priority under My Stuff>Recordings>Series Tags. So if there are recording
conflicts (eg, more than 2 series tags are scheduled to record at the same time), programs higher on the list
will be recorded ahead of programs lower in the list. See Make a priority list notes below.
2. If you see an (info symbol) next to one of your scheduled recordings in the EPG, it means that episode
has already been recorded and won't be re-recorded. The only reason it would be re-recorded is if the
existing recording is more than 10 minutes longer or shorter than the scheduled episode.
3. Where back-to-back recordings are scheduled on the same channel, the Recording Stop Time will
automatically be removed from the end of the first recording and the Recording Start Time will be removed
from the start of the second recording to avoid a recording conflict. For more information on Recording Start
and Stop Time refer to page 48.
FYI: The removal of start and end times only happens for the global Recording Start and Stop Time.
Don't worry if you have adjusted the start or end time of an individual series tag or adjusted the start or end time
for an individual recording, the start and end times will not be removed for back-to-back recordings on
the same channel.
All series you have tagged to record will appear on the Series Tag page.
MAKE A PRIORITY LIST
List your Series Tags in order of priority – favourites at the top.
They will always be recorded, even if there's a time clash with other recording.
STEP 1
Use
STEP 2
Highlight
STEP 3
Press
Press
STEP 4
prioritised based on this new list.
25
on your remote to select the series tag you want to move.
to move it up in priority or
to move the series tag up or down the list to your preferred order.
once you are happy with your priority list, all recordings will now be
to move it down in priority.