Remote Control - Optus FetchTv GEN 1 User Manual

Optus TV USER GUIDE > MANAGE

REMOTE CONTROL

Hook your remote up with your TV and DVD player.
PROGRAM YOUR REMOTE
STEP 1
Use
STEP 2
If your TV brand is listed below, select Simple Remote Set Up and follow the steps on-screen.
•
•
•
•
•
STEP 3
If your TV brand isn't on the list, select Direct Remote Set Up and follow the steps on-screen
Direct Remote Set Up:
You will need the Universal Remote Set Up Guide available at www.fetchtv.com.au to access the unique codes
for your TV or DVD player. If there's more than one code listed you'll need to try each one to find the best fit for
your equipment.
FYI: Because there are too many TVs and DVD players to keep up with these days, Optus Customer Care
doesn't offer technical support for universal remote control features.
HOT TIP:
Use your remote to choose whether you control volume on your TV or set-top box.
For TV volume, press and VOL+ simultaneously until the remote light blinks twice.
To switch back to set-top box volume, press
the remote light blinks twice.
PARENTAL CONTROLS: BLOCK CHANNELS
You can choose to block FTA or Subscription channels for viewing. Once a channel is blocked, it can't be
viewed unless the 4 digit Parental PIN is entered – so keep that PIN to yourself.
BLOCK A CHANNEL
STEP 1
Use
STEP 2
Press
STEP 3
Enter your Parental PIN – a
46
to select the remote you'll be using.
LG •
NEC •
Palsonic •
Panasonic •
Samsung •
and VOL – simultaneously until
to select the channel.
to select the Block Channel box and press
indicates that the channel has been blocked.
Sanyo
Soniq
Sony
Hisense
Teac
to block or unblock.