Optus FetchTv GEN 1 User Manual page 47

Optus TV USER GUIDE > MANAGE
PARENTAL CONTROLS: PARENTAL LEVEL
You can set Parental Levels based on program and movie classifications to make sure everyone's watching
the right kind of shows. Once set, you'll need to enter the Parental PIN to watch anything classified above the
Parental Level.
SET THE PARENTAL LEVEL
Use
STEP 1
the Parental PIN.
Press
STEP 2
classified above this level. You'll see a
PARENTAL CONTROLS: PARENTAL LOCK
The Parental Lock lets you set a time frame for watching any blocked channels or channels classified above
the Parental Level.
The Parental Lock is automatically set to 0 minutes, so you'll need to enter the Parental PIN every time you
access restricted or blocked content, regardless of whether the Parental PIN has previously been entered.
Set the time for Parental Lock
• Change setting by pressing
• To relock the Parental Lock at any time, press
STORAGE: OVERVIEW
Check out the used and available space on your hard drive and get a breakdown on how the disk space is
being used. The hard drive stores your recordings and On Demand content in separate areas.
• To delete all content from one area select it and press
• To delete all content from both press
Heads up! Select carefully because you won't be able to recover any deleted content.
DIAGNOSTICS: OVERVIEW
If you think there's a few areas that your set-top box could improve on, head to the Diagnostics Overview page
to suss out any issues. You can run a series of diagnostics tests to check the following key areas of your device:
• Internet – checks that your STB has a connection to the Internet.
• Free To Air – checks that your set-top box is receiving a free to air signal.
• Streamed TV – checks that your set-top box is able to receive subscription channels.
• Hard Disk Health – checks the performance of your set-top box's hard drive.
To run a diagnostics check:
Use
STEP 1
select Run All Tests.
STEP 2
Press
If a test completes successfully, a
If a test fails for any reason, a
about the failure.
Please refer to the Troubleshooting section of this guide for more information on troubleshooting your service.
47
to select the highest level of classification to be watched WITHOUT needing
to set the Parental Level – the Parental PIN will be needed for anything
on or next to Unlocked Time Period.
on Lock Now.
on Delete All next to the Total section.
to select the component of the service you would like to test – to test all components,
start the test.
will be displayed next to the test to indicate that no problems were found.
will be displayed next to the test – highlight the test to get further information
next to shows that are accessible to anyone.
on Delete All.