Optus FetchTv GEN 1 User Manual page 13

Optus TV USER GUIDE > SETUP
BRING ALL YOUR GEAR
IN ON THE ACTION
To ensure you receive all available channels on your set-top box, the TV antenna cable
should run from the antenna wall socket to the ANT-IN socket on your set-top box.
HOOK UP TO OTHER DEVICES (LIKE YOUR DVD/VCR PLAYER)
WITH THE ANTENNA SIGNAL
1. Connect the Optus TV antenna cable to the ANT-OUT socket on the set-top box, other end into the ANT-IN
(or RF-IN) socket on your DVD player (or other device).
2. Connect the TV to the other device by plugging another antenna cable into the ANT-OUT (or RF-OUT)
socket on the DVD player and the other end into the ANT-IN (or RF-IN) socket on the TV.
It should look something like this:
EXISTING ANTENNA CABLE
1
IN OUT
13
YOUR TV
DVD/VCR PLAYER
2
IN OUT