Important Safety Precautions; Preparing The Appliance - Melissa 653-122 User Manual

Melissa electric microwave oven with grill user guide
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 18
INTRODUCTION
To get the best out of your new apparatus, please read this user guide carefully
before using it for the first time. Take particular note of the safety precautions. We
also recommend that you keep the instructions for future reference.

IMPORTANT SAFETY PRECAUTIONS

General
• Incorrect use of this apparatus may cause personal injury and damage.
• Use for its intended purpose only, i.e. for the preparation of food. The
manufacturer is not responsible for any injury or damage resulting from incorrect
use or handling (see also Guarantee Terms).
• For domestic use only. Not for outdoor or commercial use.
• For connection to 230 V, 50 Hz only. The appliance must be earthed.
• Always follow the instructions in the "Tips for food preparation" and "Using
utensils when preparing food" sections.
• When using the grill function, only use containers suitable for use in an ordinary
oven.
• Do not switch on when empty. To able to absorb microwaves, there must be
something in the appliance (food) to avoid damage. If you would like to practice
using the various functions, place a cup of water inside the oven.
• Do not use the appliance if the turntable ring and glass tray are not installed.
• Never cook food directly on the glass turntable; always use a suitable container.
• On the right-hand side of the oven compartment there is a mica plate (resembles
cardboard); this must not be removed.
• Do not place the appliance or the cord near hot areas, for example gas rings and
electric hotplates.
• Do not use the appliance in damp environments.
• Do not use if the safety locking system is not functioning, which means that
the appliance could be switched on even if the door is not closed. If the door is
open, you risk being exposed to microwave radiation.
• Never prop the door open.
• Do not use the appliance if there are cleaning agent residues inside it.
• Keep an eye on any children in the vicinity of the appliance when it is in use.
Children must not be allowed to use the appliance unless supervised by an
adult.
• When using grill or combination cooking, the microwave oven can get very hot.
• Never insert anything into the ventilation slots or other openings.
• Do not use the appliance if the cable or plug are damaged, if it is not functioning
properly, or if it has been damaged by a heavy impact or similar.
• If the appliance or plug is damaged, it must be inspected and if necessary,
repaired by an authorised repair engineer, otherwise there is a risk of electric
shock. Never try to repair the apparatus yourself. Please contact the store where
you bought the appliance for repairs under guarantee. Unauthorised repairs or
modifications to the appliance will invalidate the guarantee.
• When the light bulb inside the appliance needs to be replaced, please contact
the store where you bought the appliance.
Fire hazard!
To reduce the risk of fire occurring in the oven compartment, please note the
following points:
• Do not cook food for too long or at too high a temperature, and do not leave
unattended if paper, plastic or other flammable materials have been used with a
view to reducing cooking times.
• Metal clips and lids/film containing metallic threads can cause sparks in the
appliance and must therefore be removed.
• Never heat oil or fat in the appliance.
• If materials in the appliance catch fire, leave the door closed. Switch off
immediately, and remove the plug from the wall socket.
UK
KEY TO MAIN COMPONENTS OF THE APPARATUS
1. Cord with plug
2. Dowels
3. Wire rack
4. Mica plate
5. Glass turntable
6. Turning ring
7. Spindle
8. Display
9. Control panel
a. "Micro/Grill/Combi" button. (microwave/grill/
combination cooking)
b. "W.T./TIME DEFROST" button (defrost by
weight/time)
c. "CLOCK/PRE-SET" button
d. STOP/CLEAR button (stop/cancel)
e. "START/+30SEC./CONFIRM" button
f. Selector button
(timer/weight/auto-menu)
Grill insert (not shown in picture)

PREPARING THE APPLIANCE

Each individual appliance is checked at the factory, but for safety's sake, after
unpacking it, you should check carefully that it has not been damaged during
transport.
• Check whether there is any visible damage (e.g. in the form of dents or similar),
if the door closes properly, if it is intact and if the hinges are in order.
• If the appliance appears to have been damaged, contact the shop where you
bought it, and do not use it until it has been checked by an authorised specialist.
• Before use, check that you have removed all packaging inside and out.
Positioning the appliance
• The appliance must stand on a flat surface capable of bearing its weight (approx
11 kg).
• The appliance is not suitable for built-in fitting. There must be a clearance of
at least 7.5 cm at the rear, 7.5 cm at the sides and 30 cm above to ensure
sufficient ventilation.
• Check that the vent holes in the cabinet are not covered. If they are covered
while the appliance is in use, there is a risk of overheating. Do not use before it
has cooled down.
• Do not remove the rubber feet.
Connection
The appliance must be connected to a 230-volt AC current, 50 Hz. The guarantee is
not valid if it is connected to the wrong voltage. When the appliance is connected to
the power supply, the display (8) shows "0:00" and one beep is heard.
Setting the clock
1. Press the "CLOCK/PRE-SET" button (c). The time is shown on the display and
the hour digits will begin to flash.
2. Turn the selector button (f) to set the hour.
3. Press the "CLOCK/PRE-SET" button; the minute number will start to flash.
4. Turn the selector button to set the minutes.
5. Press the "CLOCK/PRE-SET" button to complete the task.
6. The two dots between the figures will start to flash, which means the clock is
functioning.
Inserting the glass turntable
Before use, ensure the glass turntable (5) is correctly seated on its roller ring (6) and
spindle (7). The three dowels on the glass turntable should fit in between the three
dowels on the spindle. The three rollers on the turning ring should run in the circular
track on the underside of the glass turntable.
18
6 7
3 4
8
5
1
9
a
b
c
d
e
f

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents