Remote Wiring Harness Connection To Engine - Mercury 15XD Service Manual

OUTBOARD MOTOR INSTALLATION
6. Place the rubber seal ( side with holes towards front)) onto the control cables and
install control cables, barrel holder and rubber seal into the cable holder as shown.
7. Lock the barrel holder in place with the cable retainer latch.

Remote Wiring Harness Connection to Engine

1. Remove wire retainer from the bottom cowl.
Page 1D-8
b
a
a - Rubber Seal
b - Cable Retainer Latch
a
a - Wire Retainer
90-826883R2 JUNE 1998