Powerhead Installation
1. Verify powerhead base surface and driveshaft housing mating surfaces are free of old
gasket material.
2. Install powerhead with new gasket onto driveshaft housing.
NOTE: It may be necessary to rotate propeller shaft slightly to align crankshaft splines
with driveshaft splines.
3. Secure powerhead to driveshaft with 6 bolts. Torque bolts to 20 lb. ft. (27.1 N· m).
a -
4. Reinstall trim cover. Torque bolts to 85 lb. in. (9.6 N·N· m).
a -
90-826883R2 JUNE 1998
a
Bolts [Torque to 20 lb. ft. (27.1 N· m)]
Bolts -- Torque to 85. lb. in. (9.6 N· m)
a
a
POWERHEAD
57077
57076
Page 4-51