Startup; Usage; Fortifying Mode - Xexun TK-103 User Manual

Put a SIM card into the slot.

6 Startup

Put the SIM card in place,the LED indicator will flash after several
seconds.(NOTE:The tracker turns on atuomatically while the sim card slot be
inserted,and the tracker turns off automatically while the sim card slot take out.)
After connecting the wires with the tracker and the car,then you can see the LED
indicator flashs green arounds the wires connector(re.3.1 wires connector)
In 40-60 seconds, the unit will start to work and receive the GSM signals as well as
the GPS signals.When this unit receives GPS signals normally, you can use it and
do all the following settings.

7 Usage

The tracker has three working modes: Fortifying mode, Tracking mode and
Monitoring mode. Modes switch between "fortifying", " tracking" and "monitoring".
When power on the tracker, the default mode is "Fortifying" mode, you can send
" tracker+password" to switch to tracking mode, or send "monitor+password" to switch to
monitoring mode, or "fortify+password" back to fortifying mode.

8 Fortifying Mode

When turn on the tracker, the default mode is Fortify mode.In fortifying mode, you can
call the tracker to activate the "protection" for your loved car or vehicle. The indicator will
Insert the slot with SIM card into the tracker.
6