Site Requirements - Bunn Trifecta Installation Manual

Installation

Site Requirements

Space
• trifecta dimensions are 23" H x 12" W x 12" D
• Weight 35 lbs
Plumbing
• 1/4 male flare fitting
• Dedicated water supply with shut-off
• Connected to cold water supply
• Water pressure 20-90psi, 50psi if regulator is needed
Electrical
• 120VAC, 2 wire plus ground
• Dedicated 15Amp circuit breaker
• Receptacle within 5 feet of the brewer
Location of the Serial Number
The serial number is located on the data plate which is located on the
inside of the brewer. The serial number half tag can be found underneath
the switch panel.
Water Supply Installation
Step 1: Flush water lines.
Step 2: Securely attach 1/4" water supply line to the elbow.
Step 3: Secure the water supply line and power cord under the retainer strap in any of the three locations as needed.
Step 4: Turn on the water supply.
4
trifecta™ Training Manual
Data Plate/Serial Number
1
2
Water Line and Power Cord Entrance Locations
Serial Number
3