•
Test blood glucose level
If you have synced your meter to the app on your iOS device,
scanned the QR code of a test strip vial, and want to take a
reading with the app:
[1] Turn the Bluetooth on to connect the meter to the app on your
iOS device.
If you have synced your meter to the app on your iOS device,
scanned the QR code of test strip vial, and want to take a reading
without the app launched: Skip step [1].
[2] Insert the test strip into the meter's strip port.
Insert the test strip into the strip port with the contact bars
facing toward you.
[3] Prepare the lancing device.
Snap off the lancet device cap
Insert a new lancet firmly into the lancing holder cup
Twist the lancet cover off Replace the lancing
device cap
Set the lancing level Cock
the handle until it clicks
13