Procomp b686 Manual page 30

B686
Item
3 Doze Mode
(*) Remark 1
3 Standby Mode
(*) Remark 1
Options
1. Disable
2. 10 Sec
20 Sec
30 Sec
40 Sec
1 Min
3 Min
5 Min
10 Min
15 Min
20 Min
30 Min
40 Min
1 Hr
2 Hr
3 Hr
Note: Normally, STANDBY mode puts the system
into low speed or 8 MHz, screen may be
off depend on (E)
1. Disable
2. 10 Sec
20 Sec
30 Sec
40 Sec
1 Min
3 Min
5 Min
10 Min
15 Min
20 Min
30 Min
40 Min
1 Hr
2 Hr
3 Hr
Normally, STANDBY mode puts the system into low
speed or 8, screen may be off depend on (E)
28
Descriptions
System will never enter DOZE
mode
Defines the continuous idle time
before the system entering DOZE
mode.
If any item defined in (J) is
enabled & active, DOZE timer
will be reloaded.
System will never enter
STANDBY mode
Defines the continuous idle time
before the system entering
STANDBY mode.
If any item defined in (J) is
enabled & active, STANDBY
timer will be reloaded