Table of Contents
Advertisement
B686
C,A,SCSI/ D,A,SCSI/ E,A,SCSI/ F,A,SCSI:
System will first search for IDE hard disk driver ( C: D: or E:
or F☺ then second search floppy disk driver then SCSI hard
disk driver.
SCSI,A,C:
System will first search SCSI hard disk driver then second
search for floppy disk driver then IDE hard disk driver.
CDROM,C,A:
System will first search for the CDROM driver ( If the
CDROM has a bootable CD title.)and second search hard disk
driver then floppy disk driver .
C,CDROM,A:
System will first search for the hard disk driver and second
search for CDROM driver ( If the CDROM has a bootable CD
title,) then searches floppy disk driver.
LS120,C:
System will first search LS120 disk driver and second search
for IDE hard disk driver.
Swap Floppy Drive
Users can enable this item so that the BIOS will see the hardware "Drive A:"
as "Drive B:"" , and hardware "Drive B:"" as "Drive A:"".
Boot Up Floppy Seek
During POST, BIOS will determine if the Floppy disk drive installed is 40 or
80 tracks. 360 K type is 40 tracks while 720K, 1.2M and 1.44M drive type
as they are all 80 tracks.
Enabled:
BIOS searches for floppy disk drive to determine if it is 40 or
80 tracks. Note that BIOS can not tell from 720K, 1.2M or
1.44M drive type as they are all 80 tracks.
Disabled:
BIOS will not search for the type of floppy disk drive by track
number. Note that there will not be any warning message if
the drive installed is 360K.
20
Advertisement
Table of Contents
