Table of Contents
Advertisement
B686
Boot Up NumLock Status
The default value is On.
On: Keypad is number keys
Off: Keypad is arrow keys
Boot Up System Speed
It selects the default system speed – the speed that the system will run at
immediately after power up.
High:Set the speed to high
Low: Set the speed to low
Gate A20 Option
The Gate A20 Option default setting is fast.". This is the optimum
setting for this mainboard.
Typematic Rate Setting
This determines the typematic rate.
Enabled:
Enable typematic rate
Disabled:
Disable typematic rate
Typematic Rate (Chars/Sec)
6
: 6 characters per second
8
: 8 characters per second
10 : 10 characters per second
12 : 12 characters per second
21
Advertisement
Table of Contents
