Procomp b686 Manual page 28

B686
Item
A. Power Management
Item
3 PM Control by APM
C. Video Off Option
Options
1. Disable
2. User Define
3. Min Saving
4. Max Saving
Options
1. No
2. Yes
Note: If APM is installed, & if there is a task running,
even the timer is time out, the APM will not prompt the
BIOS to put the system into any power saving mode!
Note: − if APM is not installed, this option has no effect
To make the APM function work, users have to install
power.exe (supported by MS-DOS 5.0 or higher) in
Config.exe. To make the Windows 3.1 work regularly,
in " Windows Setup", users have to set the
"Computer" item to " MS-DOS System with APM"
1. Always On
2. Suspend
−> Off
3. Susp, Stby
−> Off
26
Descriptions
Global Power Management will
be disabled
Users can configure their own
power management
Pre-defined timer values are used
such that all timers are in their
MAX value
Pre-defined timer values are used
such that all timers MIN value
Descriptions
System BIOS will ignore APM
when power managing the system
System BIOS will wait for APM' s
prompt before it enter any PM
mode e.g. DOZE, STANDBY or
SUSPEND
System BIOS will never turn off
the screen
Screen off when system is in
SUSPEND mode
Screen off when system is in
STANDBY or SUSPEND mode