Table of Contents
Advertisement
5-6. Alarm
5-6-1. General
The events reported from individual cameras' digital inputs, digital outputs, motion detection,
PIR, or tampering detection can be accommodated in the NVR system's alarm settings. These
events will then be reported or trigger corresponding actions as follows:
1. Reporting events via Email or system buzzer.
2. Triggering video snapshot and text message by the occurrences of events to an FTP site.
3. Triggering the camera(s) for its lens to move to a preset position.
4. Triggering the cameras' digital output.
You can create up to 10 instances of alarm.
Hardware connections to DIs or DOs, e.g., window sensors, should be made separately. The
motion detection configuration can be made in the Camera configuration window.
VIVOTEK Network Cameras
5
Preset positions
Events triggered
4
FTP
3
Buzzer
Digital input/output
VIVOTEK - Built with Reliability
Digital input/output
Tampering detection/
LAN/WAN
Alarms
2
1
Event-triggered
recording
6
PIR/
Motion detection
Web Console
Email
User's Manual - 163
Advertisement
Table of Contents
