Table of Contents
Advertisement
2. The system will then start to scan the local subnet for connected cameras.
3. All cameras detected on the network will be automatically selected. If necessary, deselect the
cameras you want to exclude from the configuration. Click Continue to proceed.
NOTE:
1. The maximum recording bandwidth is 64Mbps - ND8322P or 96Mbps - ND8422P. When
cameras are recruited into the configuration, their stream 1 is used as the recording stream.
The resolution and fps (frame rate per second) of stream 1 may vary depending on the
specifications of different cameras.
2. If there are more than 8 or 16 cameras in your local network, you will need to manually select
cameras.
If there are less than 8 or 16 cameras, the Auto Setup will automatically move to the next
configuration step.
VIVOTEK - Built with Reliability
User's Manual - 19
Advertisement
Table of Contents
