VIVOTEK - Built with Reliability
Below is a glimpse of alarm sources and alarm actions:
Sources
DI
DO
Motion detection
Disk failure
Disk full
PIR
Tampering
To create an alarm,
1. Click on the Create... button.
2. The Create Alarm wizard window will prompt. You can manually enter a name for the current
setting. You can enter up to 16 numeric or alphabetic characters for the name, including
symbols such as [0-9][a-z][A-Z][_][ ]. You can also designate the interval between one alarm
and the next triggered alarm to avoid the situation that the alarms can be too frequently
triggered.
164 - User's Manual
Actions
►
Video recording
Email
Buzzer
FTP
Camera preset points
Camera DO
►video footage
►Email snapshots
►snapshots
►Pan-tilt-zoom actions