Table of Contents
Advertisement
VIVOTEK - Built with Reliability
5-5-2. Access list
The access control applies to the access from a web client over HTTP and RTSP protocols.
Three access configuration options are available:
1. Allow all: Allows access from all IP addresses.
2. Allow only: Allows access only from the listed IPs. You should manually enter the IPs for
computers that need to access the NVR.
Note that you can use the asterisk (*) mark to represent all decimal numbers in each
individual octet of the range of IP address: such as using 172.16.0.* for addresses ranging
from 172.16.0.1 to 172.16.0.254.
A decimal number between two asterisks, e.g., <172.*.10.*>, is considered as invalid.
3. Deny only: Denies the access from the listed IPs. You should manually enter the IPs for
computers that will be blocked out from the access. The configuration details is the same as
those for the Allow only methodology.
162 - User's Manual
Advertisement
Table of Contents
