Battery; Dangers; Charging; Installation - RC Logger NovaX 350 Operating Instructions Manual

25. BATTERY

25.1 Dangers

Only use the supplied flight battery or a suitable spare
battery from RC Logger.
After the flight, the LiPo flight battery must be disconnected
from the »NovaX 350.
Make sure the transmitter is turned on before connecting
the battery to the »NovaX 350.
Avoid unexpected startup. This can lead to serious injury
and damage the »NovaX 350.

25.2 Charging

For charging, use the supplied balance charger (69018RC, only supplied with 88014RC
RtF) or a charger capable of charging the »NovaX 350 flight battery. Read the operating
instructions supplied with the charger before charging.

25.3 Installation

Before you connect the battery to the »NovaX 350 turn on
the transmitter. An unbound (transmitter and »NovaX 350
cannot communicate) aircraft is considered uncontrolled.
1. Turn the »NovaX 350 back to front.
2. Follow the illustrations in [ Fig. 4 ], showing how to insert and connect the flight battery.
24 | Battery
3
4
Fig. 4
1
2