Terms; Throttle; Elevator; Rudder - RC Logger NovaX 350 Operating Instructions Manual

23. TERMS

23.1 Throttle

Throttle can be compared to a vehicle's gas pedal. More throttle increases propeller speed
and altitude and less throttle reduces propeller speed and altitude.

23.2 Elevator

Elevator denotes the movement around the lateral axis which can be compared to the
nodding of a head. Through this, the »NovaX 350 gains flight speed forwards or backwards
or decelerates.

23.3 Rudder

Rudder denotes the rotation of the »NovaX 350 around the rudder axis (vertical axis).
This movement either occurs unintentionally due to the speed torque of the propellers or
intentionally as a flight direction change. For the »NovaX 350, this movement is controlled
through speed variation of the individual propellers.

23.4 Aileron

Aileron denotes the movement around the longitudinal axis which can be compared to the
sideways rolling of a ball (or the sideways crawl of a crab). In this way, through lifting one
side the »NovaX 350 moves to the side independently of its forward direction.

23.5 Hover

Hover denotes a flight status in which the »NovaX 350 neither rises nor falls so that the
upwards directed uplift force is equal to the downwards directed weight.
22 | Terms

23.6 Mode 1, Mode 2

Mode 1 and Mode 2 refer to the stick arrangement of the transmitter.

23.7 GNSS

> GNSS stands for Global Navigation Satellite System and enables you to precisely fix
a position.
> R.T.H. (Return To Home), the GPS mode and T.P.C.S. (Task Point Command System)
make use of GNSS.
23.8 I.R.P.C
> I.R.P.C stands for Intelligent Relative Positioning Control. It utilizes compass and
positioning data to control the »NovaX 350 relatively to the take-off position.
> Activate and configure I.R.P.C. in the EYE CONTROL app. Also see chapter
I.R.P.C.' on page 38.
23.9 S.M.A.R.T
> S.M.A.R.T or Software Managed Auto Return Technology enables the pilot to quickly
and safely recover the »NovaX 350 in the event of loss of control over the »NovaX 350.
> Configure S.M.A.R.T. in the EYE CONTROL app. The AUTO function marks the motor
start location as home and the pilot can deactivate the function again to take back
control as soon as they see the situation under control.
> To learn more about S.M.A.R.T., refer to the product website and also see chapter
R.T.H.' on page 37.
'30.6
'30.5