Dell M409WX User Manual page 30

C —Allows you to change the password. Key in the original
HANGE PASSWORD
password and then enter the new password. Enter the new password again to
confirm.
T
P —Select 1 or 2 to activate the built-in Test Pattern to test the focus
EST ATTERN
and resolution. Select Off to disable the function.
1
To run the diagnostics test pattern 1, press and hold the Menu button and
button on the projectors control panel simultaneously for two seconds.
2 To run the diagnostics test pattern 2, press and hold the Menu button and
button on the projectors control panel simultaneously for two seconds.
NOTE:
To enable test pattern 2, it is required to connect an input signal to
projector.
F R —Select On to reset the projector to its factory default settings.
ACTORY ESET
30 Using Your Projector
http://www.pureglare.com.au