C
V
—Press Enter to detect Composite Video signal.
OMPOSITE
IDEO
HDMI—Press Enter to detect HDMI signal.
Auto-Adjust
message appears on the screen: Auto Adjustment in Progress....
Set Up
P
M
—Select how the image appears:
ROJECTOR
ODE
•
Front Projection-Desktop (the default).
•
Rear Projection-Desktop — The projector reverses the image so that you can
project the image from behind a translucent screen.
A
R
—Allows you to select an aspect ratio to adjust how the image
SPECT
ATIO
appears.
•
Original — The input source scales to fit the screen while keeping the aspect
ratio of the input source.
•
4:3 — The input source scales to fit the height of the screen.
•
Wide — The input source scales to fit the screen.
P
I
—Press to show the projector model name, the present input source
ROJECTOR
NFO
and projector series number (PPID#).
22
Using Your Projector
Auto Adjust automatically adjusts the
projector's display settings. While auto
adjustment is in progress, the following
http://www.pureglare.com.au
V. K
—Allows you to
EYSTONE
adjust image distortion
caused by tilting the projector.
A
K
—Auto adjusts
UTO
EYSTONE
the image distortion by tilting
the projector.