Storage And Shipment - Acom 1500 Manual

e) Signatures of the amplifier internal status are stored in a nonvolatile memory for the 7 most recent
auto protection trips.
f) High brightness 5x7 dot character vacuum fluorescent display (VFD) with bargraph for forward peak
power and text messages to the operator.
g) Measurement and constant monitoring of 12 most important amplifier parameters via VFD.
h) Menu-selectable display Brightness.
i) Tube: a single 4CX1000A/8168 ceramic and metal radial beam tetrode with plate dissipation of
1000W (forced air cooled, grid-driven), specifically designed for class AB1 RF linear amplifiers.

7-3. Storage and Shipment

Should you need to transport the amplifier, use the original packing as described
below.
First, switch off the amplifier. Pull the mains plug out of the wall outlet. Disconnect all cables from the
rear panel of the amplifier (remove the ground connection the last). Finally, pack the amplifier in its
original carton.
a) Storage environments: the amplifier can be kept packed in dry and ventilated unheated premises
without chemically active substances (acids, alkalis etc.) in the following climatic environment:
- Temperature range: -40 to +70 degs. Celsius;
- Humidity: up to 75% @ +35 degs. Celsius.
b) Shipping Size and Weight: W560mm x D560mm x H300mm, 29.5kg. (22 x 22 x 11.8 inches, 65Lbs)
c) Shipping environments: all types of transportation, including aircraft baggage section up to 12 000
meters (40 000ft) above sea level.
C A U T I O N
E N D
21