Powering On/Off The Projector; Powering On The Projector - Optoma EP1690 User Manual

Installation
Turn on the projector
first and then the signal
sources.
English 2

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap. 
2. Ensure that the power cord and signal cable are securely
connected. The Power LED will flash green.
3. Turn on the lamp by pressing "Standby/ON" button on
the control panel. And the Power LED will turn green.
4. Turn on your source (computer, notebook, video player,
etc.). The projector will detect your source automatically .
If you connect multiple sources at the same time, use the

"Source" button on the control panel or direct source key
on remote control to switch.
http://www.pureglare.com.au
Standby/ON
2
1
Lens Cap