Control Settings; Selector Switch; Thermostat Control; Ventilation Control - GE AMH06 Use And Care & Installation Manual

Selector Switch

High fan speed–
HI FAN
No cooling
LO FAN
Low fan speed–
No cooling
OFF
SELECTOR
CAUTION: If you move the switch from a cool
setting to OFF or to a fan setting, wait at least
3 minutes before switching back to a cool setting.
For normal cooling
THERMOSTAT
For quieter operation
THERMOSTAT
Air circulation & filtering only
Select either LO FAN or HI FAN for air circulation
and filtering.
HI FAN
LO FAN
SELECTOR
OPERATING YOUR CONTROLS
Cooling with
low fan speed
LO COOL
HI COOL
Cooling with
high fan speed
HI COOL
SELECTOR
LO COOL
SELECTOR

Thermostat Control

THERMOSTAT
For maximum cooling
THERMOSTAT

Ventilation Control

The VENT control is a lever and is located above the
control panel.
When the VENT is set at CLOSE, only the air inside
the room can be circulated and conditioned.
When set at OPEN, some indoor air can be exhausted
from the room.
CLOSE
Energy Saver Switch
The fan cycles
on and off.
ENERGY SAVER
HI COOL
SELECTOR
VENT OPEN
The fan runs
all the time.
NORMAL
3