Control Settings; Selector Switch; Thermostat Control; Ventilation Control - GE AVV18 Use And Care & Installation Manual

OFF
I
COOL

Selector Switch

OFF turns air conditioner off.
NOTE: If the air conditioner is
shut off, wait at least two minutes
before restarting it.
HI FAN provides high fan speed
operation without cooling.
LO FAN provides low fan speed
operation without cooling.
HI COOL provides cooling with
high fan speed operation.
LO COOL provides cooling with
low fan speed operation.
For Normal Cooling
Set the Selector Switch at HI
1.
COOL.
2. Set the Thermostat Control at the
desired number (usually the midpoint
is a good starting position). If room
temperature is not satisfactory after
a reasonable time, set the
Thermostat Control at a higher
number for a cooler room or at a
lower number for a warmer room.
For Quieter Operation
1. Set the Selector Switch at the
LO COOL position.
2. Set the Thermostat Control to
the desired number.
3. Set the Ventilation Control
at CLOSED.
HI FAN

Thermostat Control

When you move the Thermostat
Control to the desired setting,
the thermostat will automatically
control the temperature of the
indoor air. The higher the number
selected, the cooler the indoor air
will become.
3. Set the Ventilation Control at
CLOSED except for brief periods
when you want to exhaust room air
to the outside.
For Maximum Cooling
Set the Selector Switch at HI
1.
COOL.
2. Set the Thermostat Control to 8.
3. Set the Ventilation Control at
CLOSED.
For Nighttime Operation
During the cooler evening hours,
we recommend that you set the
Selector Switch at LO COOL
for quieter operation and the
Thermostat Control at mid-range
(4 or 5). Set the Ventilation
Control at CLOSED.
CLOSED
\
OPEN

Ventilation Control

When you move the Ventilation
Control to CLOSED, the vent door
is closed and only the air inside
the room will be circulated and
conditioned. Moving the control
to OPEN opens the vent door,
allowing a small amount of indoor
air to be exhausted from the room.
However, cooling effectiveness is
reduced when this control is set at
OPEN, so we suggest you don't
keep it there long+ specially in
hot. humid weather.
For air circulation and
filtering without cooling
Set the Selector Switch at LO FAN
or HI FAN.
For Extreme Temperatures
For greatest economy and best
performance, we suggest you set
the Selector Switch at HI COOL in
extremely hot weather.
3