Table of Contents
Advertisement
2
Understanding the Hardware
2.1 Hardware Installation
a) Plug one end of the Ethernet cable into the AP port of the PoE Injector and the
other end into the Bridge/AP.
b) Place one end of another Ethernet cable into the Network port of the PoE
injector and another end into your PC/Notebook.
c) Insert the DC-inlet of the power adapter into the port "DC-IN" and the other
end into the power socket on the wall.
d) The DHCP server function is enabled on the device, and your PC will receive
an IP address from the device. Ensure that the TCP/IP settings on your
computers are configured as Obtain IP address automatically.
e) Place the unit in an appropriate place after conducting a site survey. Refer to
the mounting instructions in the user's manual.
15
Advertisement
Table of Contents
