LevelOne WAB-7400 User Manual page 58

Dual radio poe mesh access point

Hide thumbs Also See for WAB-7400:

Table of Contents

NMS address configuration page contains the following parameters:

 NMS Address List: List of NMS server.

 "Add" button to add entry to the NMS address list.

 "Edit" button to edit current selection.

 "Delete" button to edit current selection.

 Click on the Save Changes button to store and changes and then reboot the

device in order for the changes to take effect.

Figure 9.7.2 illustrates the NMS address configuration page for add or edit.

Figure 9.7.2: NMS Addresses – add or edit page

NMS Address: add page contain the following parameter:

 Address: Enter the IP address of the NMS server.

 Port: Enter the port of the NMS server which is waiting for the report.

 Interval: Enter the interval of report to NMS server.

 Comments: Enter comments for the entry.

 Active: Enable or disable this entry.

 Click on the Save Changes button to store and changes and then reboot the

device in order for the changes to take effect.

Table of Contents