LevelOne WAB-7400 User Manual page 50

Dual radio poe mesh access point

Hide thumbs Also See for WAB-7400:

Table of Contents

Figure 9.2.1: SNMP configuration page

SNMP configuration page contains the following parameters:

 Active: Enable or disable SNMP management.

 Version: Select "v1 or v2c", "v3", or "all" SNMP version.

 Port: Enter the SNMP port number.

 v2 Read Community: Enter the v2 Read Community.

 Reconfirm v2 Read Community: Re-enter v2 Read Community to verify.

 v2 Read-write Community: Enter the v2 Read-write Community.

 Reconfirm v2 Read-write Community: Re-enter v2 Read-write Community

for verification.

Table of Contents