Table of Contents
Advertisement
WME – edit page contains the following parameters:
Interface: Specify the interface for WMM.
Comments: Optional comments for this entry.
Active: Enable or disable WME.
CWMIN: Minimum contention window. This parameter is input to the
algorithm that determines the initial random backoff wait time (window) for
retry of a transmission. The value specified here in the Minimum Contention
Window is the upper limit (in milliseconds) of a range from which the initial
random back off wait time is determined.
a)
Data type: Integer, in the range of 0 to 255
CWMAX: Maximum contention window. Maximum Contention Window.
The value specified here in the Maximum Contention Window is the upper
limit (in milliseconds) for the doubling of the random backoff value.
a)
Data type: Integer, in the range of 0 to 255
AIFS: The Arbitration Inter-Frame Spacing Number specifies a wait time (in
milliseconds) for data frames.
a)
Data type: Integer, in the range of 0 to 255
Figure 8.1.2: WME - edit page
45
Advertisement
Table of Contents
