Sony PMW-EX30 Operating Instructions Manual page 90

Menu items
HDMI/CMPNT/SDI
Out DISP
Making a setting for
superinposition of
text information on
the HDMI/
component/SDI
outputs
CMPST/ S Out
Display
Making a setting for
superinposition of
text information on
the composite/S-
video outputs
Setup
Setting 7.5% setup
for the composite
signal
Down Converter
Selecting the
operation mode of
the down converter
90 Setup Menu List
Subitems and
setting values
On / Off
On / Off
On / Off
Squeeze /
Letterbox / Edge
Crop
Description
Set whether to superimpose the same text
information (menus and status indications)
on the output signals from the HDMI,
COMPONENT and HD/SD SDI OUTPUT
connectors as that displayed on the LCD
display.
Set whether to superimpose the same text
information (menus and status indications)
on the output signals from the COMPOSITE
and S-VIDEO connectors as that displayed
on the LCD display.
Set whether to add 7.5% black setup to the
output signal from the COMPOSITE
connector when a format of NTSC is
selected.
Notes
• This item is disabled (displayed in grey)
when a format of PAL is selected.
• The default setting is different among the
sales areas.
United States and Canada: On
Other areas: Off
Set the output mode (aspect) for SD output
from the COMPOSITE, S-VIDEO,
COMPONENT, and HD/SD SDI OUTPUT
connectors.
Squeeze: To horizontally reduce a 16:9
picture to output a 4:3 picture
Letterbox: To mask the upper and lower
areas of a 4:3 picture to display a 16:9
picture in the center of the screen
Edge Crop: To cut the both sides of a 16:9
picture to output a 4:3 picture
Note
This item is disabled (displayed in grey)
during recording or playback.