Remove the expansion board.
7.
To replace the component, reverse the removal procedure.
PCIe riser board
To remove the component:
Power down the server (on page 28).
1.
Remove all power:
2.
Disconnect each power cord from the power source.
a.
Disconnect each power cord from the server.
b.
Do one of the following:
3.
Extend the server from the rack (on page 29).
o
Remove the server from the rack (on page 30).
o
Remove the access panel
4.
Remove the PCI riser cage
5.
Remove any existing expansion board from the riser board
6.
Remove the riser board:
7.
Full-height riser board
o
("Access
panel" on page 35).
("PCI riser
cage" on page 46).
("Expansion
board" on page 47).
Removal and replacement procedures 48