Control Panel - ResMed VPAP ST User Manual

Positive airway pressure devices
Hide thumbs Also See for VPAP ST:
Table of Contents

Advertisement

The following side effects may arise during the course of therapy with these devices:
drying of the nose, mouth, or throat
nosebleed
bloating
ear or sinus discomfort
eye irritation
skin rashes.
Masks and humidifiers
Recommended masks and humidifiers are available on www.resmed.com on the Products page under
Service & Support. For information on using your mask or humidifier, refer to the manual supplied with
your mask or humidifier.
Setup
Refer to illustration A.
1. Connect the DC plug of the power supply unit to the rear of the device.
2. Connect the power cord to the power supply unit.
3. Plug the other end of the power cord into the power outlet.
4. Connect one end of the air tubing firmly onto the air outlet.
5. Connect the assembled mask system to the free end of the air tubing.

Control panel

Refer to illustration B.
The control panel of your device includes the following items:
1. Start/Stop button: Starts or stops treatment
2. Home menu
3. LCD screen
4. Info menu*: Allows you to view your sleep statistics
5. Setup menu*: Allows you to make changes to settings
6. Push dial: Turning the dial allows you to scroll through the menu and change settings. Pushing the
dial allows you to enter into a menu and confirm your choice.
*The Info and Setup menus are disabled if S9 Essentials has been enabled by your clinician.
2
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vpap sAutoset csS9 auto 25

Table of Contents