Page 2
AutoSet CS at a glance The AutoSet CS system comprises the following elements: • AutoSet CS device • Air tubing • 90W power supply unit • S9 travel bag • SD card • S9 SD card protective folder. Optional components include: •...
Page 3
Setup 1. Connect the DC plug of the power supply unit to the rear of the AutoSet CS. 2. Connect the power cord to the power supply unit. 3. Plug the other end of the power cord into the power outlet.
Page 4
AutoSet CS basics dial allows you to enter into a menu and The control panel of your AutoSet CS device confirm your choice. includes an LCD screen as well as a Start/Stop button, Push dial and the Info and Setup menu keys.
Adjusting ramp time Designed to make the beginning of treatment more comfortable, ramp time is the period during which the pressure increases from a low start pressure to the treatment pressure. To adjust your ramp time: 2. Press 1. From your HOME 3.
Selecting the mask type To select your type of mask: 1. Press . The SETTINGS 2. Turn until Mask is 3. Press screen is displayed. displayed in blue. The selection is highlighted in orange. 4. Turn until the mask 5. Press to confirm your 6.
Getting started 1. Make sure the power is connected. 2. Adjust the ramp time if required. 3. Fit your mask as described in your mask user guide. 4. To start therapy, simply breathe into the mask and/or press 5. Lie down and arrange the air tubing so that it is free to move if you turn in your sleep.
Viewing the treatment screens Depending on how the system has been configured, you will see one of the following example screens once therapy has started: 9 H5i humidifier 9 H5i humidifier 9 H5i humidifier 9 ClimateLine or ClimateLine 9 ClimateLine or ClimateLine heated air tube heated air tube 9 Climate Control –...
4. Before next use, reconnect the air tubing to the air outlet and mask. Monthly 1. Wipe the exterior of the AutoSet CS with a damp cloth and mild detergent. 2. Check the air filter for holes and blockage by dirt or dust. Replace the air filter if necessary.
Page 10
1. Remove the air filter cover from the back of the AutoSet CS device. 2. Remove and discard the old air filter. 3. Insert a new ResMed air filter ensuring that it is sitting flat in the air filter cover. 4. Replace the air filter cover.
Page 11
SD card An SD card has been supplied to gather therapy data from your AutoSet CS device and provide settings updates from your clinician. When instructed to do so, disconnect the AutoSet CS device from the power outlet, remove your SD...