Fisher & Paykel DishDrawer DD24DA User Manual page 29

PROBLEM
The wash program
seems to have
finished (the
dishwasher is
idle), but the end
of wash beeps
haven't sounded
and the
drawer cannot be
opened
Water pooling
on inner rim of
drawer after a
wash
Water under the
drain filter
Excess water in
the drawer
Water marks on
the dishes
Drawer interior is
stained
TROUBLESHOOTING
POSSIBLE CAUSE
The wash program is
still
underway. It is in a
'quiet'
phase that is needed for
ensuring the best wash
results.
This is normal
condensation.
This is normal and needs no action.
Drain hose(s) bent or
kinked.
Blocked filters.
Rinse aid depleted.
Rinse aid setting too
low or off.
Dishwasher overloaded/
incorrectly loaded.
Some foods, like tomato
based products, may
stain the inside of the
drawer.
WHAT TO DO
No action required. The program will
transition into a more audible phase
after the 'quiet' phase is over.
Wipe dry.
Straighten the drain hose(s).
Clean the filter plate/drain filter. Refer to
'User maintenance instructions'.
Refill the rinse aid dispenser.
Increase the rinse aid setting.
Refer to the section on loading.
Pre-rinse dishes before placing in the
drawer. Alternatively, using the Rinse
program after adding the dishes may
minimise staining.
25