Cleaning the drain filter and filter plate
IMPORTANT!
If a dishwasher cleaner / descaler is used, you must run a wash programme with
●
●
detergent immediately afterward to prevent any damage to your dishwasher.
The dishwasher must be used with the filter plate, drain filter and spray arm correctly
●
●
in place.
We recommend that you always use the dishwasher with the right hand fixed tine
●
●
plate rack in place.
Remove the fixed tine plate rack and/or the base rack first
1 Unplug the dishwasher or turn it off at the power supply.
Note: For ease of access to the drain filter and filter plate you may find it easier to
remove the whole base rack first.
To remove the whole base rack: lift the rack up from the back first to prevent it knocking
against the detergent and rinse aid dispenser and lift out.
2 If the base rack is left in - to then access the drain filter:
Remove the cutlery basket
●
●
Lift the trap door up
●
●
Lift the front of the fixed tine plate rack to unclip it from the base rack
●
●
Slide the fixed tine plate rack forward clear of the rear anchoring loop and lift out.
●
●
rear anchoring loop
Fixed tine plate rack-rear
USER MAINTENANCE INSTRUCTIONS
Lift trap door up
Stop
Fixed tine plate rack-front
19