Wash Programs And Detergent Quantities - Fisher & Paykel DishDrawer DD24DA User Manual

WASH PROGRAMS AND POWDERED DETERGENT QUANTITIES
Find out about water hardness in your home, then use the table below to determine
● ●
how much powdered detergent to use for each wash program. See also section 'Water
hardness and dishwashing'.
For information on which program to use for your load, see your 'Quick start guide'.
● ●
The main powdered detergent dispenser has markings to help you measure the correct
● ●
quantities. See following section 'Adding detergent'.
WATER HARDNESS
parts per million (ppm)
grains per gallon (gpg)
<100 ppm or
SOFTER
< 6 gpg*
100 -150 ppm or
6 - 9 gpg
>150 ppm or
>9 gpg
HARDER
* If you have a a household water softener installed, use the quantities recommended for water with a
hardness under 100 ppm/6 gpg, irrespective of the water hardness in your area.
Notes:
If your water hardness is above 625ppm/36 gpg, we highly recommend you completely
fill the main detergent dispenser for all programs (except Rinse) and the secondary
dispenser for heavily soiled loads. The rinse aid setting should be at 5.
If your water hardness is above 625ppm/36 gpg, the wash performance of your
dishwasher will decline.
12
WASH
PROGRAMS
Heavy
Normal
Fast
Delicate
Rinse
Heavy
Normal
Fast
Delicate
Rinse
Heavy
Normal
Fast
Delicate
Rinse
POWDERED DETERGENT
QUANTITIES (PER DRAWER)
US CA
main detergent
dispenser
marking
2/3
2/3
1/3
1/3
-
full
full
full
full
-
full
full
full
full
-
NZ AU
grams
20
20
10
10
-
30
30
20
30
-
30
30
30
30
-