Collated Copying - Olivetti d-Copia 2200MF Operation Manual

Collated Copying

A number of collated copy sets can be produced.
If the optional document processor is installed, you can select whether or not to turn on the sort
Note
mode at a default setting.
Set the original.
1
Press the Collate key.
2
Input the number of copies and press the Start key. Scanning of the original starts.
3
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
Replace the original and press the Start key. Scanning of the original starts.
4
If no original remains, press the Enter key. Copying starts.
5
Basic Operation
Original Copy
3-9