Olivetti d-Copia 2200MF Operation Manual page 85

Symptom
Printing cannot be
performed.
Correct characters are not
printed.
Printing is not performed
properly.
The copies are curled.
Items to check
Is the power plug connected to an AC
outlet?
Is the main power switch turned on?
Is a proper printer cable connected
securely?
Was the printer cable connected after
this machine was turned on?
Is the machine offline? (Is the Ready
indicator off?)
Is a proper printer cable connected?
Is the setting on the computer correct? Check the setting of the printer driver or
Is the copy paper wet?
Is Middle 2 set at the Paper type
(Paper Weight) setting? (Normally,
Middle 2 is set.)
Corrective procedure
Connect the plug to an AC outlet.
Turn the main power switch on ( | ).
Connect the printer cable securely.
After connecting the printer cable, turn
this machine on.
Press the Print key to display
1
the printer basic screen.
Press the key or the
2
select GO.
Press the Enter key. The Ready
3
indicator lights up.
Connect a shielded type printer cable.
the application software.
Replace the copy paper with dry, new
paper.
Set Middle 1 at the Paper type (Paper
Weight) setting.
Troubleshooting
Reference
page
2-10
—
2-9
2-9
—
key to
2-9
—
2-1
-
6-3