Olivetti d-Copia 2200MF Operation Manual page 50

Basic Operation
Set the original.
1
Press the Duplex key.
2
Press the
3
duplex copy mode.
Press the Enter key.
4
If you have selected 1 sided->2 sided, proceed to the next step.
If you have selected 2 sided->2 sided or Book->2-sided, proceed to step 7.
Press the
5
finished stitch side.
Press the Enter key.
6
Press the Start key. Scanning of the original starts.
7
If the originals have been set in the optional document processor, copying starts automatically.
If the original has been set on the platen, a message prompting replacement of the original is
displayed. In this case, proceed to the next step.
Replace the original and press the Start key. Scanning of the original starts.
8
If no original remains, press the Enter key. Copying starts.
9
3-8
key or the key to select the desired
key or the key to select the desired
Duplex/Split Page:
1 sided 2 sided
2 sided
2 sided
Book 2-sided
Saddle Stitch Direction:
Left side
Top side