Loading Paper Into The Cassette - Olivetti d-Copia 2200MF Operation Manual

Preparations

Loading Paper into the Cassette

Standard paper, recycled paper, and colored paper can be loaded into the cassette. Up to 300
sheets of standard paper (80 g/m²) or 100 sheets of thick paper (90 to 105 g/m²) can be set.
Paper sizes that can be loaded are: A3, B4, A4, A4R, B5, B5R, A5R, Folio, 11 × 17" (Ledger),
8
and 16K.
When loading paper into the cassette, set it with the side to be printed facing up.
Note
Pull the cassette out toward you as far as it will go.
1
Do not pull more than one cassette out at a time.
Note
Push down on the cassette base plate and secure it.
2
Grasp the paper width adjusting tab and adjust the
3
width guides to the paper size.
Make sure that the width guides are flush against the paper. If there is space between the guides
Important!
and the paper, set the width guides again.
The paper sizes are marked in the cassette.
Note
2-2
× 14" (Legal), 11 × 8
1/2
", 8 × 11" (Letter), 5
1/2 1/2
× 8 " (Statement), 8
1/2 1/2
× 13" (Oficio II), 8K,
1/2