Crivit Z31433 Operation And Safety Notes

1a 2b
1b
I
5
2c 4
BIKE COMPUTER
A
BIKE COMPUTER
Operation and Safety Notes
2b
CYKELCOMPUTER
5
Brugs- og sikkerhedsanvisninger
2a
IAN 97799
Included items
6b Bike computer's battery compartment cover
LC display
7
Function indicator 1 Bike computer
8
Secondary function value display 1 Bike computer bracket
9
Primary function value display 1 Magnet
10
MODE button 1 Sensor
11
Light button 1 Bracket cushion plate
12
SET button 1 Sensor cushion plate
13
14 SCAN indicator 4 Cable ties
15 Servicing interval indicator 2 Batteries 3 V , type CR2032 button cell
16 Speed comparison indicator 1 Operating instructions
Acceleration / deceleration indicator:
17
Acceleration – anticlockwise rotation
General safety advice
Deceleration – clockwise rotation
Battery state indicator
18
KEEP ALL THE SAFETY ADVICE AND INSTRUC-
Technical data
TIONS IN A SAFE PLACE FOR FUTURE REFERENCE!
Battery: 3 V (CR2032 button cell) This appliance can be used by children aged
from 8 years and above and persons with
GB
Confirm your choice by pressing the SET button. reactivate the computer. The function indicator
Repeat this process for all the remaining digits. shows the current mode.
8
You move on to selecting the servicing interval. Press the MODE button repeatedly to page
11
Press the MODE button repeatedly until the through the various modes.
desired number of units of distance to your next Press the SET button to change into the sec-
13
intended bicycle service appears in the LC ondary function for any function.
display. Press the SET button and keep it pressed to call
Note: You have the choice of 200, 400, 600 or reset up any saved values.
or 800 km or miles.
Confirm your choice by pressing the SET button. The bike computer has the following
You move on to selecting the unit of temperature. functions:
Press the MODE button repeatedly until °C or
°F appears in the LC display. Advanced users' functions:
Confirm your choice by pressing the SET button. CLOCK > TOTALODO > TOTAL-TM > TRIPDIST >
You have now completed the the basic settings. MAXSPEED > AVGSPEED > TRIPTIME > TEMP >
STPWATCH > CAL RATE > CALORIE > FAT-BURN >
Using the bike computer
KM+/- > TIME+/- > SCAN
Note: If the bike computer remains unused for Beginners' functions:
more than 5 minutes, it automatically switches TRIPDIST > AVGSPEED > TRIPTIME
into the stand-by mode. Press any button to
GB
Resetting the bike computer
way round (polarity). This is shown inside the
Press the MODE button and SET button battery compartment.
11 13
at the same time and keep them pressed until Press the SET key and keep it pressed to return
{{----}} appears in the LC display . to normal operating mode.
7
Now press the MODE button and keep it Note: Once the batteries are removed, all stored
pressed. This resets all the settings. data will be erased after approx. 20 seconds.
Note: All stored data will be deleted.
Troubleshooting
Changing the battery
Note: This device has delicate electronic compo-
Note: The battery of the bike computer must be nents. Therefore interference may occur when it is
replaced when the battery symbol 18 appears on near devices which transmit radio signals.
the LC display . - If errors occur in the display, remove any such
7
Note: The battery of the sensor must be replaced devices from the vicinity of the product. In the case
when the speed symbol of the LC display can of such malfunctions, remove the battery briefly and
17
no longer or hardly be seen when riding the bicycle. then reinsert again.
Press the MODE key and the SET key
11 13
at the same time and keep them pressed until
the {{-----}} symbol appears in the LC display .
7
To replace the battery, proceed as shown in
figure A. Make sure you fit the battery the right
GB
B C
3 1a 4
6a
max. 30°
Fig. C
1b
Fig. D
6b
2a
Fig. E
5
3
6a
reduced physical, sensory or mental capabilities Remove the battery if the product is not to be
or lack of experience and knowledge if they used for a long period.
have been given supervision or instruction con- CAUTION! RISK OF EXPLO-
cerning use of the appliance in a safe way and SION! Never recharge single-use
understand the hazards involved. Children shall batteries!
not play with the appliance. Cleaning and user CAUTION! DANGER OF EXPLO-
maintenance shall not be made by children SION! Always replace all batteries
without supervision. at the same time and only use batteries
Please note that the warranty does not cover of the same type.
damage arising from improper treatment, non- If the battery is exhausted, remove it from the
observance of the operating instructions and device immediately. Otherwise the battery is
safety advice or unauthorised use. more likely to leak.
Make sure you insert the battery the right way
Safety advice concerning
round (polarity).
batteries
Keep the battery away from children. Do not
throw the battery into a fire. Never short-circuit
RISK OF LOSS OF LIFE! it or take it apart.
If batteries are swallowed, it can lead to loss of If your battery leaks, remove it from the device
life. Seek medical attention if a battery is swal- immediately to prevent the device from being
lowed. damaged.
GB GB
Using functions
Press the SET button and keep it pressed for
Note: All the functions and secondary functions 3 seconds to reset the maximum speed display
are described in the following list. to 0.
CLOCK: - Displays the time AVGSPEED: Average speed
Press the SET button and keep it pressed for TRIPTIME: Trip time
13
3 seconds to access the time settings. TEMP: Thermometer
TOTALODO: - Total odometer Press the SET button and keep it pressed to
Press the SET button and keep it pressed for switch between °C and °F.
3 seconds to access the wheel size settings Press the SET button to display the highest tem-
and total distance. perature (HI) measured so far.
TOTAL-TM: Total time cycling Press the SET button again to display the low-
Press the SET button and keep it pressed for est temperature (LO) measured so far.
3 seconds to make changes to the saved total Press and hold down the SET button while the
time cycling. highest or lowest temperature is displayed to
TRIPDIST: Trip distance switch back to the current temperature to
Press the SET button and keep it pressed for reset the saved data.
3 seconds to reset the trip distance, the STPWATCH: Stopwatch
average speed and the trip time displays to 0. Press the SET button to start the stopwatch.
MAXSPEED: Highest speed Press the SET button again to stop the stopwatch.
GB GB
Problem Solution Speed or distance are
not displayed.
Empty LC-display or no Remove battery. In the
response after putting area marked RESET of
the battery in again the battery compartment,
touch the plus and minus
terminals at the same
+
-
time using a screwdriver. Display is black
Insert a 3V battery into
RESET
the battery compartment
in such a way that the +
terminal points upwards.
Replace the battery cover
on the battery compart-
ment. The microprocessor The LC-display shows
is reset and restarted. irregular symbols.
GB GB
D F
2a
4 2 mm max.
2c
4
2a
E G
2a
3
3
Do not let the fluid from a leaking battery come sensor 2a
into contact with your skin, eyes or mucous mem- within a 30° angle as shown in figure B.
branes. In the event of contact with fluid leaking
Preparing for use
from a battery, thoroughly flush the affected area
with water and / or seek the advice of a doctor!
Basic settings
Before use
Note: The LC display
approx. 2 seconds after the battery
Remove the protective foil from the LC display 7 You are immediately offered a choice of languages.
before first use. Press the MODE-button
desired language appears.
Inserting the battery
Confirm your choice by pressing the SET but-
To insert the battery , proceed as shown in ton
5 13
Fig. A. the user profile.
Press the MODE button repeatedly until the
Attaching the bike computer
desired user profile (ADVANCE or EASY)
To attach the device, proceed as shown in appears.
Figs. B to G. Confirm your choice by pressing the SET button.
Note: Make sure that the bike computer is Now you can choose the wheel size (SET WS).
6a
attached with less than 70 cm distance to the
GB GB
Press the SET button and keep it pressed to A 5-digit number appears in the LC display. Enter
reset the stopwatch to 0. the desired distance. Press the MODE button
CAL RATE: Current calorie consumption repeatedly until the desired number appears
CALORIE: Calorie meter as the first digit.
Press the SET button and keep it pressed to Confirm your choice by pressing the SET button.
reset the calorie counter to 0. Repeat this process for all the remaining digits.
FAT-BURN: Fat burning in grams TIME: Timer
Press the SET button and keep it pressed to Press the SET button and keep it pressed to
reset the fat burning value to 0. change the timer settings.
KM: Odometer The LC display shows the symbol for counting
Press the SET button and keep it pressed to forwards or backwards (+ or - respectively).
change the odometer settings. Press the MODE button repeatedly until the
The LC display shows the symbol for count- desired symbol is shown.
7
ing forwards or backwards (+ or - respectively). Confirm your choice by pressing the SET button.
Press the MODE button repeatedly until the You move on to the time settings of the timer.
11
desired symbol is shown. A 5-digit number appears in the LC display.
Confirm your choice by pressing the SET button. Enter the desired time. Press the MODE button
You move on to setting the distance on the repeatedly until the desired number appears
odometer. as the first digit.
Confirm your choice by pressing the SET button.
GB GB
Cleaning and care
Adjust magnet and
sensor correctly.
- Check that the battery Do not use any liquids or cleaning agents for
is inserted with the cleaning. Otherwise there is a risk of damaging
poles arranged the the device.
right way round. The device should only be cleaned on the out- Defective or exhausted batteries must be recycled
side with a soft dry cloth. in accordance with Directive 2006 / 66 / EC. Return
The ambient temperature the batteries and / or the device through the appro-
Disposal
is too high or the bicycle priate collection facilities.
computer was exposed
to direct sunlight for too The packaging is wholly composed of
long. Remove appliance environmentally friendly materials that can
from direct sunlight and be disposed of at a local recycling centre.
let it cool off for a while. Batteries must not be disposed of with the house-
Remove battery and Contact your local refuse disposal authority for more hold refuse. They may contain toxic heavy metals
replace it again. details of how to dispose of your worn-out product. and require to be handled as special waste. The
chemical symbols of heavy metals are: Cd = cad-
In the interest of the environment, do not mium, Hg = mercury, Pb = lead For this reason,
throw out your product with your house- you must dispose of discarded batteries at a com-
hold refuse. Take it to a suitable centre munal disposal centre.
GB GB
H
3 2a
7
8
18
9
17
16
15
10
14
13 11
12
. Fix the bike computer to the sensor A four-digit number appears in the LC display.
Now enter the tyre circumference of your wheel
in mm. Press the MODE button repeatedly until
the desired number appears as the first digit.
Confirm your choice by pressing the SET button.
Repeat this process for each of the three
comes on automatically remaining digits.
7
is inserted. Note: You can calculate your tyre circumference
5
by multiplying your tyre diameter by 3.1416.
11 repeatedly until the The following list contains the tyre circumferences
of the most common cycle tyres.
Tyre diameter Tyre circumference
. You move on automatically to select 20" 1598 mm
22" 1759 mm
24" 1916 mm
26" (650 A) 2073 mm
26.5" (tubular) 2117 mm
26.6" (700x25C) 2124 mm
26.8" (700x28C) 2136 mm
27" (700x32C) 2155 mm
GB GB
Repeat this process for all the remaining digits.
SCAN: Scan
Note: The scan mode automatically switches
between the trip distance, highest speed, average
speed and trip time displays.
Note: Refer to the section on "Basic settings" to
see how you make or change settings.
CUSTOMIZE mode
Apart from the ADVANCE and EASY mode, you
can make your individual adjustments in the
CUSTOMIZE mode (see procedure).
12
Press and hold the light button to enter the
CUSTOMIZE mode.
Note: By repeatedly pressing the MODE but-
ton , you can toggle between the ADVANCE
11
and EASY modes.
In the EASY mode, press and hold the SET
button 13 . Press the MODE button to switch
GB GB
Declaration of conformity
where it can be disposed of properly.
Your local council will be able to tell you
where the collection centres are located We, OWIM GmbH & Co. KG, Stiftsbergstraße 1,
and their opening times. D-74167 Neckarsulm, hereby declare under our
sole responsibility that the product: Bike Computer,
Model No.: Z31433 / Z31433A / Z31433B /
Z31433C, Version: 03 / 2014, to which this decla-
ration refers, complies with the standards / normative
documents of 1999 / 5 / EC.
Improper disposal of batteries
can damage the environment!
The complete declaration of conformity can be
viewed at: www.owim.com.
GB GB
Bike Computer
– Odometer (countdown or forwards)
– Total odometer and total cycling time display
Proper use
– Calories
– Fat-burning
The product is intended for use as a cycle computer. – Scan indicator (functions displayed in
Not for commercial use. continuous loop)
– Automatic switch to clock mode
Functions
– Backlight
Description of parts
– Menu languages: GB, DE, FR, NL, IT, ES
– Clock
– Stopwatch 1a Bracket
– Temperature °C / °F Bracket cushion plate
1b
– Memory function for min. and max. temperature Sensor
2a
– Current speed (0–99.9 km / h) Sensor battery compartment cover
2b
– Mean speed (0–99.9 km / h) Sensor cushion plate
2c
– Highest speed (0–99.9 km / h) Magnet
3
– Speed comparison Cable tie
4
– Acceleration and deceleration Battery 3 V , type CR2032 button cell
5
– Trip timer (max. 9:59:59) (countdown or forwards) 6a Bike computer
GB
28" (700B) 2237 mm Press the MODE button repeatedly until SET
ATB24"x1.75 1888 mm KG or SET LB appears in the LC display.
ATB26 x1.4 1995 mm Confirm your choice by pressing the SET button.
ATB26 x1.5 2030 mm You move on to entering your weight.
ATB26 x1.75 2045 mm A three-digit number appears in the LC display.
ATB26x2 (650B) 2099 mm Now enter your weight. Press the MODE button
27"x1 2138 mm repeatedly until the desired number appears
27"x1 1 / 4 2155 mm as the first digit.
Now select your desired unit of distance. Press Confirm your choice by pressing the SET button.
the MODE button repeatedly until SET KM or Repeat this process for all the remaining digits.
SET MILE appears in the LC display. You move on to selecting the time format.
Confirm your choice by pressing the SET button. Press the MODE button repeatedly until 12 for
You move on to entering your age. the 12-hour format or 24 for the 24-hour format
A two-digit number appears in the LC display. appears in the LC display.
Now enter your age. Press the MODE button Confirm your choice by pressing the SET button.
repeatedly until the desired number appears You move on to setting the time.
as the first digit. A four-digit number appears in the LC display.
Confirm your choice by pressing the SET button. Enter the current time. Press the MODE button
Repeat this process for the remaining digit. You repeatedly until the desired number appears
move on to selecting the unit of weight. as the first digit.
GB
Using the backlight
the settings on or off (e.g. time). Choose „On",
to add the chosen adjustment to the EASY Press the light button to switch on the back-
12
modes. Choose „Off", if you do not want to light temporarily. The backlight automatically
add the adjustments. extinguishes after a short period.
Press the SET button, to confirm your entry.
GB
Warranty
The warranty applies to faults in material or manu-
facture. This warranty does not cover product parts
The device has been manufactured to strict quality subject to normal wear, thus possibly considered
guidelines and meticulously examined before deliv- consumables (e.g. batteries) or for damage to frag-
ery. In the event of product defects you have legal ile parts, e.g. switches, rechargeable batteries or
rights against the retailer of this product. Your legal glass parts.
rights are not limited in any way by our warranty
detailed below.
The warranty for this device is 3 years from the date
of purchase. Should this device show any fault in
materials or manufacture within 3 years from the
date of purchase, we will repair or replace it – at our
choice – free of charge to you.
The warranty period begins on the date of purchase.
Please keep the original sales receipt in a safe loca-
tion. This document is required as your proof of pur-
chase. This warranty becomes void if the device has
been damaged or improperly used or maintained.
GB
GB
GB
GB
GB