System Control Connections - Euphonix Max Air Manual

Euphonix Max Air Installation Guide
1.9

System Control Connections

Ethernet
Several intelligent system components are connected via RJ45 Ethernet through a EuCon
Ethernet switch. These devices include:
•
SC263 System Computer
•
CM404 Center Section Module
•
CM416 16-channel Modules
•
DF66 SuperCores
•
CO600 Changeover Switch
•
Modular I/O Remote Preamps/Embedder/De-embedders (optional)
KVM Extender
The KVM Extender cable is a Category 5 UTP cable, however it does not carry Ethernet
data like the system components. The KVM Extender requires its own dedicated cable. Its
maximum length is 400 ft (120 m).
Monitor, trackball, and keyboard
The Max Air System Computer is displayed on the CM404 touchscreen. A keyboard and
mouse are connected to the CM404. Additionally, a connection for a "local" keyboard,
mouse, video and serial (touchscreen) port is provided at the KVM's transmitter side (clo-
sest to the SC263) to facilitate local control, i.e., from the Central Equipment Room.
TCC Control
The SC263 System Computer connects to the MC524 Monitor Interface and up to seven
Monitor Interface ML530 Mic/Line Interfaces via a TCC connection.
GPIO Control
The TT002 provides GPIO control for the system. This interface is installed in the SC263
System Computer.
14
Max Air Overview