Summary Of Max Air Components - Euphonix Max Air Manual

Euphonix Max Air Installati
The following chart summarizes this section:
Component
Contains 8 faders for masters, 17-inch Touch-
CM404
screen, and Superchannel controls.
Contains 16 physical faders that control two
CM416
layers of 16 inputs.
M a
SC263
controls MC524, ML530, and Modular I/O
System Computer
components.
TT002
Provides up to 32 buffered TTL inputs and 32
GP Input/Output
open-collector outputs
System
MC524
Analog monitor output controller
Monitor Interface
ML530
24 remote-control microphone preamps
Mic/Line Interface
DF66
Performs all system DSP
SuperCore
CO600
MADI routing hub for failover system.
Changeover Switch
Provides 24 Analog to MADI Converters, dual-
AM713
channel Aux Digital Input (AES/EBU or S/PDIF
Analog to MADI
available), and Aux dual-channel Analog Input.
Converter
MA703
Provides 24 MADI to Analog Converters, dual-
MADI to Analog
channel Aux Digital Output (AES/EBU or S/PDIF
available), and Aux dual-channel Analog Output.
Converter
Provides 12 pairs (24 channels) of AES/EBU to
DM714
MADI conversion, dual-channel Aux Digital Input
AES/EBU to MADI
(AES/EBU or S/PDIF available), and Aux dual-
Converter
channel Analog Input.
Provides 12 pairs (24 channels) of MADI to
MD704
AES/EBU conversion, dual-channel Aux Digital
MADI to AES/EBU
Output (AES/EBU or S/PDIF available), and
Converter
Aux dual-channel Analog Output.
Provides 28 pairs (56 channels) of input format
FC726
conversion and 28 pairs (56 channels) of output
Digital Format
format conversion. Supports MADI, AES/EBU,
Converter
T-DIF, ADAT Optical, and S-DIF2.
Provides 64 channels of format converted inputs
and outputs. Supports MADI, AES/EBU, Ana-
Modular I/O
log, remote-control mic preamps, HD/SD em-
bedders/de-embedders.
o n G u d i e
Table 1-4 Summary of Max Air Components
Function
t s r e s s y e t m c o m p u e t r. Configures DF66,
Number
1 required
Ethernet device
(max)
Ethernet device
3 full max
1 e r q i u e r d E
and up to 7 ML530s via TCC.
Houses GPIO card.
Housed in the SC263 System
1 required
Computer.
TCC connection to SC263.
1 required
1 MA703 is required (included).
TCC connection to SC263. 1 AM713
7 max
is required per ML530 (included).
1 required
Ethernet device. Requires digital
(2 max in
sync reference.
redundant
system)
Ethernet device.
1 max
Paired with
ML530 for
Requires digital sync reference.
Mic level
inputs.
Paired with
MC524 for
Requires digital sync reference.
Monitor
outputs.
Requires digital sync reference.
Optional
Optional 75-ohm BNC AES/EBU
connectors.
Requires digital sync reference.
Optional
Optional 75-ohm BNC AES/EBU
connectors.
Optional Requires digital sync reference.
Requires digital sync reference and
ethernet connection for remote mic
Optional
preamps and 8 ch embedder/de-
embedder.
17
M a x A r i O v e
Notes
h t e n r t e d e v c i e. Connects to MC524
v r e i w