Cisco UCS C3160 Installation And Service Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS C3160
  6. Installation and service manual
Cisco UCS C3160 Installation And Service Manual

Cisco UCS C3160 Installation And Service Manual

Hide thumbs Also See for UCS C3160:
Table of Contents

Advertisement

Quick Links

Download this manual
Cisco UCS C3160 Rack Server
Installation and Service Guide
March 12, 2015
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-32062-01

Advertisement

Table of Contents
loading

Related Manuals for Cisco UCS C3160

Summary of Contents for Cisco UCS C3160

  • Page 1 Cisco UCS C3160 Rack Server Installation and Service Guide March 12, 2015 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-32062-01...
  • Page 2 OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks.

  • Page 3: Table Of Contents

    Reversing the Cable Management Arm (Optional) 2-10 Initial Server Setup 2-11 Connecting and Powering On the System (Standalone Mode) 2-11 Local Connection Procedure 2-11 Remote Connection Procedure 2-12 Cisco IMC Configuration Utility Setup 2-13 Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 4 DIMM Replacement Procedure 3-32 Replacing CPUs and Heatsinks Inside the Server Node 3-33 CPU Configuration Rules 3-33 CPU Replacement Procedure 3-33 Additional CPU-Related Parts To Order With RMA Replacement Server Nodes 3-38 Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 5 Supercap Power Module (RAID Backup Unit) Restoring RAID Configuration After Replacing a RAID Controller For More Information Installation for Cisco UCS Integration A P P E N D I X Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 6 Contents Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 7 Preface This preface describes the audience, and conventions of the Cisco UCS C3160 Rack Server Installation and Service Guide. It also provides information about how to obtain related documentation. Audience This guide is for experienced network administrators who configure and maintain Cisco servers.
  • Page 8 üblichen Verfahren zur Vorbeugung vor Unfällen vertraut. Suchen Sie mit der am Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. Cisco UCS C3160 Rack Server Installation and Service Guide viii OL-32062-01...
  • Page 9 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 10 Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 11 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 12 Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 13 Cisco UCS C3160 Rack Server Installation and Service Guide xiii OL-32062-01...

  • Page 14: Related Documentation

    Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation as an RSS feed and delivers content directly to your desktop using a reader application. The RSS feeds are a free service.

  • Page 15: Front Panel Features

    C H A P T E R Overview This chapter provides an overview of the Cisco UCS C3160 high-density storage server. Front Panel Features Figure 1-1 shows the front panel features of the system. The system is shown with the removable front bezel installed.

  • Page 16: Rear Panel Features

    System I/O controller (SIOC), one or two. 16 Do not use this SIOC 2 port. Use the Port types vary, depending on the type of management port on SIOC 1. adapter card installed. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 17: Chapter 1 Overview

    The top view of the system in Figure 1-3 shows the top covers open. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 18 Server node Power supplies (four, redundant as 2+2) See also Components Inside the Server Node, page 1-5. Drive expander module 3.5-inch drives (up to four in the optional drive expander module) Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 19: Components Inside The Server Node

    DIMMs (8 sockets for each CPU, 16 total) Cisco modular RAID controller card with SuperCap power module (backup) attached CPUs and heat sinks (two) Internal USB port for USB thumb-drive (accessible with the node cover on) Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 20: Components Inside The System I/O Controller

    The view shown is with the cover of the module removed. Figure 1-5 Replaceable Components Inside the System I/O Controller RTC battery CR 1632 Adapter card (either dual-port 10 Gb SFP+ or quad-port 1 Gb RJ-45) Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 21: System Features Overview

    KVM cable, which provides two USB, one VGA, and one serial connector. Internal USB The system includes one internal USB 2.0 slot inside the server node. Power Two or four power supplies, 1050 W each (hot-swappable and redundant as 2+2). Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 22 Cisco Integrated Management Controller (Cisco IMC) firmware. management Depending on your NIC mode settings, the Cisco IMC can be accessed through the dedicated management port, the 1-Gb LOM ports, or the 10-Gb LOM ports. 1. Hot-swappable = No preconditioning of the component is required before removal while the system is powered on.

  • Page 23: Installing The Server

    Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 24: Chapter 2 Installing The Server

    35° C (95° F). Statement 1047 Warning The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019 Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 25 Ensure that the site power meets the power requirements listed in the Server Specifications, • page A-1. If available, you can use an uninterruptible power supply (UPS) to protect against power failures. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 26: Rack Requirements

    • Equipment Requirements The slide rails supplied by Cisco Systems for this server do not require tools for installation if you install them in a rack that has square 0.38-inch (9.6 mm), round 0.28-inch (7.1 mm), or #12-24 UNC threaded holes.

  • Page 27: Installing The Server In A Rack

    Hold down the inner rail release clip and at the same time, pull the inner rail free from the rail assembly. Figure 2-1 Removing the Inner Rail From the Assembly Rail release latch (close-up view) Inner rail release clip Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 28 Release the rear-peg spring latch to lock the rear pegs in place. Attach the second slide-rail assembly to the opposite side of the rack. Ensure that the two slide-rail assemblies at the same height with each other and level front-to-back. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 29 (see Figure 2-4). Ensure that both release clips are disengaged before pushing the system into the rack. Push the server Caution into the rails slowly to avoid damaging the rails. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 30 2-4) unless you intend to remove the server from the rack. Depressing the release clips on the inner rails allows the server to slide all the way out of the intermediate rails and could result in injury or equipment damage. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 31: Installing The Cable Management Arm (Optional)

    CMA tab on arm closest to the server and end Rear of server of inner slide rail attached to server Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 32: Reversing The Cable Management Arm (Optional)

    180 degrees so that it points toward the rear of the server. Figure 2-6 Reversing the CMA CMA tab on end of width-adjustment slider Metal button for rotating Cisco UCS C3160 Rack Server Installation and Service Guide 2-10 OL-32062-01...

  • Page 33: Initial Server Setup

    With the Dedicated mode, the dedicated management port on the system I/O controller (SIOC) is used to access the Cisco IMC. You must select a NIC redundancy and IP setting. If you want to use a different port to access the Cisco IMC, you can connect to the server and change the NIC mode as...

  • Page 34: Remote Connection Procedure

    Allow your preconfigured DHCP server to assign an IP address to the server node. Step 3 Use the assigned IP address to access and log in to the Cisco IMC for the server node. Consult with your Step 4 DHCP server administrator to determine the IP address.

  • Page 35: Cisco Imc Configuration Utility Setup

    The following procedure is performed after you connect to the system and open the Cisco IMC Configuration Utility. Step 1 Set NIC mode and NIC redundancy: Set the NIC mode to your choice for which ports to use to access the Cisco IMC for server management (see Figure 1-2 for identification of the ports): •...
  • Page 36 Use a browser and the IP address of the Cisco IMC to connect to the Cisco IMC management interface. The IP address is based upon the settings that you made (either a static address or the address assigned by your DHCP server).

  • Page 37: Nic Modes And Nic Redundancy Settings

    Dedicated—The dedicated management port on system I/O controller 1 (SIOC 1) is used to access • the Cisco IMC. You must select a NIC redundancy and IP setting. This is the factory-default setting. Shared LOM—Not supported at this time. •...

  • Page 38: System Bios And Cisco Imc Firmware

    When you upgrade the BIOS firmware, you must also upgrade the Cisco IMC firmware to the same Caution version or the server does not boot. Do not power on the server until the BIOS and Cisco IMC firmware match or the server does not boot.

  • Page 39: Accessing The System Bios

    Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or press Step 6 F10). You can exit without saving changes by pressing Esc. Cisco UCS C3160 Rack Server Installation and Service Guide 2-17 OL-32062-01...
  • Page 40 Chapter 2 Installing the Server System BIOS and Cisco IMC Firmware Cisco UCS C3160 Rack Server Installation and Service Guide 2-18 OL-32062-01...

  • Page 41: Status Leds And Buttons

    This section describes the location and meaning of LEDs and buttons and includes the following topics: Front-Panel LEDs, page 3-2 • Rear-Panel LEDs and Buttons, page 3-4 • Internal Diagnostic LEDs, page 3-7 • Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 42: Front-Panel Leds

    Green—The system is in main power mode. Power is supplied to all components. • System unit identification Off—The unit identification LED is not in use. • Blue, blinking—The unit identification LED is activated. • Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 43 (14 drive bays in each row). Figure 3-9 for an example. In this example, the red LED indicates that the failing drive is in the right half of the internal drive compartment, in row 3. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 44: Rear-Panel Leds And Buttons

    (quad-port 1-Gb RJ-45 adapter card only) 1-Gb dedicated management Ethernet link 19 Port not used at this time. Use the speed management port on SIOC 1. 10 1-Gb dedicated management Ethernet link status Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 45 1-Gb Ethernet link status Off—No link is present. • (only when quad 1 Gb adapter Green—Link is active. • card is installed) Green, blinking—Traffic is present on the active link. • Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 46 Drive Expander Module Status LED P3V3 HDD Present HDD Status LED Status None None None No plug-in None Amber Fail No plug-in None Amber Plug-in Good Green Plug-in Fail Amber Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 47: Internal Diagnostic Leds

    Off—There is no drive in the drive tray (no access, no fault). • Green—The drive is ready. • Green, blinking—The drive is reading or writing data. • Fan fault LEDs • Off—Component is functioning normally. • Amber—Component has failed. Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...
  • Page 48 A fault LED that lights amber indicates a faulty component. Figure 3-4 Internal Diagnostic LEDs on the Server Node Board CPU 2 CPU 1 Server node unit identification button Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 49: Preparing For System Component Installation Or Replacement

    Shutting Down and Powering Off the System You can invoke a graceful shutdown or a hard shutdown by using either the Cisco Integrated Management Controller (Cisco IMC) interface or the system power button on the front panel.

  • Page 50: Opening The Main Chassis Top Covers

    While holding in both latch-buttons, open the hinged cover from the center toward the rear of the system. To secure the cover, hold in both latch-buttons while you close the cover flat. Release the latch-buttons. Cisco UCS C3160 Rack Server Installation and Service Guide 3-10 OL-32062-01...
  • Page 51 Preparing for System Component Installation or Replacement Figure 3-5 Opening the Top Covers Latch-release buttons for left internal-drives Latch-release buttons for fan compartment compartment Latch-release buttons for right internal-drives compartment Cisco UCS C3160 Rack Server Installation and Service Guide 3-11 OL-32062-01...

  • Page 52: Removing The Server Node Cover

    Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the server node. Step 6 Replace power cords and then power on the system by pressing and holding the power button on the front handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-12 OL-32062-01...
  • Page 53 Chapter 3 Maintaining the System Preparing for System Component Installation or Replacement Figure 3-6 Removing the Server Node Cover Server node cover Latch handle (shown in flat, closed position) Cisco UCS C3160 Rack Server Installation and Service Guide 3-13 OL-32062-01...

  • Page 54: Removing The System I/O Controller Cover

    Tighten the thumbscrew on the SIOC levers. Step 6 Replace power cables and then power on the system by pressing and holding the power button on the front handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-14 OL-32062-01...
  • Page 55 Chapter 3 Maintaining the System Preparing for System Component Installation or Replacement Figure 3-7 Removing the SIOC Cover SIOC cover Release button Cisco UCS C3160 Rack Server Installation and Service Guide 3-15 OL-32062-01...

  • Page 56: Installing Or Replacing System Components

    Replacing an Adapter Card Inside the SIOC, page 3-48 • Replacing an RTC Battery Inside the SIOC, page 3-50 • Service Headers on the Server Node Board, page 3-52 • See also Replaceable Component Locations, page 1-3. Cisco UCS C3160 Rack Server Installation and Service Guide 3-16 OL-32062-01...

  • Page 57: Replacing Hard Drives Or Solid State Drives

    HDD49 HDD08 HDD22 HDD36 HDD50 HDD09 HDD23 HDD37 HDD51 HDD10 HDD24 HDD38 HDD52 HDD11 HDD25 HDD39 HDD53 HDD12 HDD26 HDD40 HDD54 HDD13 HDD27 HDD41 HDD55 HDD14 HDD28 HDD42 HDD56 Cisco UCS C3160 Rack Server Installation and Service Guide 3-17 OL-32062-01...
  • Page 58 3. Open the right- or left-side cover and look at the fault LEDs on the drive trays. Step 2 A solid amber fault LED indicates a failed drive. Cisco UCS C3160 Rack Server Installation and Service Guide 3-18 OL-32062-01...
  • Page 59 Internal-Drive Status LED Example Internal-drive fault LEDs on right-front handle of system, 3 Front of system indicating faulty drive in right side of row 3 Fault LED on drive carrier Cisco UCS C3160 Rack Server Installation and Service Guide 3-19 OL-32062-01...
  • Page 60 Step 6 Close the chassis cover and push the system back into the rack. Figure 3-10 Internal Drive Carrier Features Drive lever Drive fault LED Release button Drive activity LED Cisco UCS C3160 Rack Server Installation and Service Guide 3-20 OL-32062-01...

  • Page 61: Replacing Hard Drives In The Optional Drive Expander Module

    Lift the drive lever to the fully open position, then pull the drive straight up out of its bay. Spare drives are already installed in a carrier, so it is not necessary to remove the old drive from its carrier. Install a new drive: Step 3 Cisco UCS C3160 Rack Server Installation and Service Guide 3-21 OL-32062-01...

  • Page 62: Replacing Solid State Drives In The Rear Panel Solid State Drive Bays

    3-11). Note Populate drives starting with the lowest-numbered bay to the highest. • Keep the blanking panel in the lower two SSD bays to ensure proper air flow. • Cisco UCS C3160 Rack Server Installation and Service Guide 3-22 OL-32062-01...

  • Page 63: Enabling Ahci Sata Mode

    Choose the Advanced tab, and then choose SATA Configuration. Step 2 Set SATA Mode to AHCI Mode. Step 3 Press F10 to save your changes and exit the utility. Step 4 Cisco UCS C3160 Rack Server Installation and Service Guide 3-23 OL-32062-01...

  • Page 64: Replacing Fan Modules

    Close the fan compartment cover and then push the system back into the rack. Step 5 Figure 3-14 Fan Modules (Top View) Fan module fault LED Air flow direction arrow pointing toward rear of server Fan module release latches Cisco UCS C3160 Rack Server Installation and Service Guide 3-24 OL-32062-01...

  • Page 65: Replacing A Server Node

    Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the server node. Step 4 Replace power cords and then power on the system by pressing and holding the power button on the front handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-25 OL-32062-01...

  • Page 66: Replacing A Drive Expander Module

    Push the module into the bay until it engages with the midplane connectors. Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the module. Cisco UCS C3160 Rack Server Installation and Service Guide 3-26 OL-32062-01...

  • Page 67: Replacing A System I/O Controller

    Tighten the thumbscrew on the SIOC ejector levers. Replace power cables, and then power on the system by pressing and holding the power button for four Step 5 seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-27 OL-32062-01...

  • Page 68: Replacing A Power Supply

    HDD 58 HDD 59 HDD 60 SIOC 1 SIOC 2 SSD 1 SSD 2 PSU 1 PSU 2 PSU 3 PSU 4 Power supply release lever Power supply handle Cisco UCS C3160 Rack Server Installation and Service Guide 3-28 OL-32062-01...

  • Page 69: Replacing Dimms Inside The Server Node

    Caution DIMMs and their sockets are fragile and must be handled with care to avoid damage during installation. Cisco does not support third-party DIMMs. Using non-Cisco DIMMs in the system might result in Caution system problems or damage to the motherboard.
  • Page 70 DIMM 2 slots. For example, populate the DIMM slots in this order: A1, E1, B1, F1, C1, G1, D1, H1 A2, E2, B2, F2, C2, G2, D2, H2 • Observe the DIMM mixing rules shown in Table 3-5. Cisco UCS C3160 Rack Server Installation and Service Guide 3-30 OL-32062-01...
  • Page 71 For example, DIMMs in sockets A1, B1, C1, and D1 must be identical. DIMMs in sockets A2, B2, C2, and D2 must be identical. However, the A1-B1-C1-D1 DIMMs do not have to be identical with the A2-B2-C2-D2 DIMMs. Cisco UCS C3160 Rack Server Installation and Service Guide 3-31 OL-32062-01...

  • Page 72: Dimm Replacement Procedure

    Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the server node. Replace power cords and then power on the system by pressing and holding the power button on the front Step 8 handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-32 OL-32062-01...

  • Page 73: Replacing Cpus And Heatsinks Inside The Server Node

    Caution between the motherboard and the CPU. Do not attempt this procedure without the required tools, which are included with each CPU option kit. If you do not have the tool, you can order a spare (Cisco PID UCS-CPU-EP-PNP). To install or replace a CPU heatsink and CPU, follow these steps:...
  • Page 74 Press the top button on the tool to grasp the installed CPU. Lift the tool and CPU straight up. Press the top button on the tool to release the old CPU on an antistatic surface. Cisco UCS C3160 Rack Server Installation and Service Guide 3-34 OL-32062-01...
  • Page 75 Make sure that the tabs on the tool are fully seated in the slots on the pedestal. Press the side lever on the tool to grasp and lock in the CPU. Lift the tool and CPU straight up off the pedestal. Cisco UCS C3160 Rack Server Installation and Service Guide 3-35 OL-32062-01...
  • Page 76 Apply an alcohol-based cleaning solution to the old thermal grease and let it soak for a least 15 seconds. Wipe all of the old thermal grease off the old heatsink using a soft cloth that will not scratch the heatsink surface. Cisco UCS C3160 Rack Server Installation and Service Guide 3-36 OL-32062-01...
  • Page 77 Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the server node. Step 13 Replace power cords and then power on the system by pressing and holding the power button on the front handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-37 OL-32062-01...

  • Page 78: Additional Cpu-Related Parts To Order With Rma Replacement Server Nodes

    It is important to clean the old thermal interface material off of the CPU prior to installing the heatsinks. Therefore, when ordering new heatsinks it is still necessary to order the heatsink cleaning kit at a minimum. Cisco UCS C3160 Rack Server Installation and Service Guide 3-38 OL-32062-01...

  • Page 79: Replacing A Raid Controller Card Inside The Server Node

    Replacing a RAID Controller Card Inside the Server Node The Cisco modular RAID controller card connects to a mezzanine-style socket inside the server node. The SuperCap power module (SCPM) comes already attached to a new card, so you do not have to remove that separately.
  • Page 80 I outlined in blue CPU 2 CPU 1 Screw that passes through supercap power Heatsink assembly module cover to standoff Two captive screws that pass through heatsink assembly to standoffs Cisco UCS C3160 Rack Server Installation and Service Guide 3-40 OL-32062-01...

  • Page 81: Replacing An Rtc Battery Inside The Server Node

    Rotate both ejector levers toward the center until they lay flat and their latches lock into the rear of the server node. Step 6 Replace power cords and then power on the system by pressing and holding the power button on the front handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-41 OL-32062-01...
  • Page 82 Location of the Server Node RTC Battery and USB Port Server node RTC battery on board, behind 2 Internal USB port on board, behind edge of cover edge of cover Cisco UCS C3160 Rack Server Installation and Service Guide 3-42 OL-32062-01...

  • Page 83: Replacing An Internal Usb Drive Inside The Server Node

    Enabling or Disabling the Internal USB Port, page 3-43 • Internal USB Drive Replacement Procedure To install or replace an internal Cisco USB Flash Drive, follow these steps: Shut down and remove power from the entire system, as described in Shutting Down and Powering Off...

  • Page 84: Installing A Trusted Platform Module Inside The Server Node

    TPM board with the screw hole adjacent to the TPM socket. Push down evenly on the TPM to seat it in the motherboard socket. Install the single one-way screw that secures the TPM to the motherboard. Cisco UCS C3160 Rack Server Installation and Service Guide 3-44 OL-32062-01...

  • Page 85: Enabling Tpm Support In The Bios

    After hardware installation, you must enable TPM support in the BIOS: Note Enable TPM support: Step 1 Watch during bootup for the F2 prompt, and then press F2 to enter BIOS setup. Cisco UCS C3160 Rack Server Installation and Service Guide 3-45 OL-32062-01...

  • Page 86: Enabling The Intel Txt Feature In The Bios

    Press Escape to return to the BIOS Setup utility Advanced tab. On the Advanced tab, choose Processor Configuration to open the Processor Configuration window. Set Intel (R) VT and Intel (R) VT-d to Enabled. Cisco UCS C3160 Rack Server Installation and Service Guide 3-46 OL-32062-01...
  • Page 87 Return to the Intel TXT(LT-SX) Hardware Support window if you are not already there. Set TXT Support to Enabled. Press F10 to save your changes and exit the BIOS Setup utility. Step 5 Cisco UCS C3160 Rack Server Installation and Service Guide 3-47 OL-32062-01...

  • Page 88: Replacing An Adapter Card Inside The Sioc

    Tighten the thumbscrew on the SIOC levers. Replace power cords and then power on the system by pressing and holding the power button on the front Step 8 handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-48 OL-32062-01...

  • Page 89: Special Considerations For Cisco Ucs Virtual Interface Cards

    The Cisco UCS VIC 1227 (UCSC-MLOM-CSC-02) is not compatible to use in Cisco Card NIC mode Note with a certain Cisco SFP+ module. Do not use a Cisco SFP+ module part number 37-0961-01 that has a serial number in the range MOC1238xxxx to MOC1309xxxx. If you use the Cisco UCS VIC 1227 in Cisco Card NIC mode, use a different part number Cisco SFP+ module, or you can use this part number 37-0961-01 if the serial number is not included in the range above.

  • Page 90: Replacing An Rtc Battery Inside The Sioc

    Tighten the thumbscrew on the SIOC levers. Replace power cords and then power on the system by pressing and holding the power button on the front Step 8 handle for four seconds. Cisco UCS C3160 Rack Server Installation and Service Guide 3-50 OL-32062-01...
  • Page 91 Chapter 3 Maintaining the System Installing or Replacing System Components Figure 3-28 Replacing an RTC Battery Inside the SIOC Battery socket on SIOC board Cisco UCS C3160 Rack Server Installation and Service Guide 3-51 OL-32062-01...

  • Page 92: Service Headers On The Server Node Board

    Header P13 = CMOS clear • Figure 3-29 Service Headers on the Server Node Board CPU 2 CPU 1 Header P11 = Password clear Header P13 = CMOS clear Cisco UCS C3160 Rack Server Installation and Service Guide 3-52 OL-32062-01...

  • Page 93: Using The Clear Password Header P11

    Step 9 Remove the jumper from pins 2 and 3. Step 10 If you do not remove the jumper, the Cisco IMC clears the password each time that you boot the Note server node. Install the server node cover, and then install server node back to the system.

  • Page 94: Using The Clear Cmos Header P13

    Step 8 Remove the jumper from pins 2 and 3. Step 9 If you do not remove the jumper, the Cisco IMC clears the CMOS settings each time that you Note boot the server node. Install the server node cover, and then install server node back to the system.

  • Page 95: Appendix

    A P P E N D I X Server Specifications This appendix lists the technical specifications for the Cisco UCS C3160 Server and includes the following sections: Physical Specifications, page A-1 • Environmental Specifications, page A-2 • Power Specifications, page A-2 •...

  • Page 96: Environmental Specifications

    Main power: 87.5 DC Amps (at 180-264 VAC), 66.67 DC Amps (at 90-180 VAC) Standby power: 2.5 DC Amps You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator: http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/ Cisco UCS C3160 Rack Server Installation and Service Guide...

  • Page 97: Appendix A Server Specification

    Appendix A Server Specifications Power Specifications Cisco UCS C3160 Rack Server Installation and Service Guide OL-22326-01...

  • Page 98: Power Specifications

    Appendix A Server Specifications Power Specifications Cisco UCS C3160 Rack Server Installation and Service Guide OL-22326-01...

  • Page 99: Appendix

    N5000 power cable, 250 VAC 10 A, Europe CAB-9K10A-IT N5000 power cable, 250 VAC 10 A, Italy CAB-9K10A-SW N5000 power cable, 250 VAC 10 A, Switzerland CAB-9K10A-UK N5000 power cable, 250 VAC 10 A, United Kingdom Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 100: Appendix B Power Cable Specification

    N5000 power cable, 250 VAC 10 A, Argentina SFS-250V-10A-CN N5000 power cable, 250 VAC 10 A, China SFS-250V-10A-ID N5000 power cable, 250 VAC 10A, India SFS-250V-10A-IS N5000 power cable, 250 VAC 10 A, Israel Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

  • Page 101: Appendix

    This server supports installation of one supercap power module (SCPM) backup unit. The unit mounts directly to the Cisco modular RAID controller card inside the server node. The unit comes already attached to the card and is not sold as a separate component.

  • Page 102: Restoring Raid Configuration After Replacing A Raid Controller

    For basic information about RAID and for using the utilities for the RAID controller cards, see the Cisco UCS Servers RAID Guide. Full Avago Technologies/LSI documentation is also available: Avago Technologies/LSI 12 Gb/s MegaRAID SAS Software User’s Guide, Rev. F Cisco UCS C3160 Rack Server Installation and Service Guide OL-27640-01...
  • Page 103 Appendix C RAID Controller Considerations For More Information Cisco UCS C3160 Rack Server Installation and Service Guide OL-27640-01...
  • Page 104 Appendix C RAID Controller Considerations For More Information Cisco UCS C3160 Rack Server Installation and Service Guide OL-27640-01...

  • Page 105: Appendix

    A P P E N D I X Installation for Cisco UCS Integration At this time, the Cisco UCS C3160 server operates in standalone mode only. Cisco UCS integration is not supported. Cisco UCS C3160 Rack Server Installation and Service Guide...

  • Page 106: A P P E N D I X D Installation For Cisco Ucs Integration

    Appendix D Installation for Cisco UCS Integration Cisco UCS C3160 Rack Server Installation and Service Guide OL-32062-01...

Table of Contents