Cisco UCS C3160 Installation And Service Manual page 58

Installing or Replacing System Components
Identifying a Faulty Internal Drive
The system has internal-drive fault LEDs on the right-front handle (see
get an indication of the location of a failing drive.
Step 1 Observe the internal-drive fault LEDs on the right-front handle.
•
•
See
right half of the internal drive compartment, in row 3.
Open the right- or left-side cover and look at the fault LEDs on the drive trays.
Step 2
A solid amber fault LED indicates a failed drive.
Cisco UCS C3160 Rack Server Installation and Service Guide
3-18
The two columns of LEDs correspond to the two halves of the internal drive compartment (under
either the right- or left-side top cover).
The four numbered rows of LEDs correspond to the four horizontal rows of drive bays (14 drive bays
in each row).
Figure 3-9 for an example. In this example, the amber LED indicates that the failing drive is in the
Chapter 3 Maintaining the System
Figure 3-1). Use these LEDs to
OL-32062-01