Event Triggered Execution - Sony IPELA SNC-VM772R User Manual

Note
Models sold in China do not support the TLS function.
Authentication
Select whether authentication is required when you send
an e-mail.
None: No authentication is required when an e-mail is
sent.
SMTP: Select when SMTP authentication is required.
POP before SMTP: Select when POP before SMTP
authentication is required.
Combination of POP before SMTP and SMTP:
Select when both SMTP authentication and POP
before SMTP authentication is required.
POP mode
Select POP3 or APOP as the authentication method for
POP authentication.
Note
The model on sale in China does not support the APOP
authentication.
Wait time after POP
Set the waiting time in POP before SMTP before
SMTP authentication after POP authentication is
completed. Timeout can be set from 0 to 10,000 msec.
POP server name
This is necessary when POP before SMTP is selected
for Authentication.
Type the POP (receiving mail) server name using up to
64 characters, or type the IP address of the POP server.
This setting is necessary when the SMTP server that
sends e-mails performs authentication using the POP
user account.
POP port number
Enter a port number from 1 to 65535.
The standard port number is 110.
Authentication mode
Select Login or CRAM-MD5 as the authentication
method for SMTP authentication.
Note
The model on sale in China does not support the CRAM-
MD5 authentication.
User name, Password
Type the user name and password of the user who owns
the mail account using up to 64 characters. This setting
is necessary when the SMTP server that sends e-mails
performs authentication.
Address
Recipient e-mail address 1, 2, 3
Type the recipient e-mail address using up to 64
characters.
You can specify up to three recipient e-mail addresses.
Administrator e-mail address
Type the Administrator e-mail address using up to 64
characters.
This address is used for reply e-mails and sending
system messages from the mail server.
Content
Subject
Type the subject/title of the e-mail. The length for
entering letters should be within 64 characters.
When an e-mail is sent in response to an alarm detection,
the following string that indicates the type of alarm that
will be added in the subject.
• When the Sensor 1 detects an alarm: (Sensor 1)
• When the Sensor 2 detects an alarm: (Sensor 2)
• When the Camera tampering detection detects an
alarm: (Tampering)
• When the Motion detection detects an alarm: (VMD)
• When VMF detects an alarm: (VMF)
• When the Network disconnection is detected
(Disconnected)
• When the Face detection detects an alarm: (Face
Detection)
(Event1 (Condition1)) is additionally available for event
condition detection.
Message
Type the text of the e-mail.
The length for entering letters should be within 384
characters.

Event triggered execution

File attachment
Set whether an image file (JPEG file) is to be attached to
the e-mail or not.
When the checkbox is selected, the image file made
using the settings below is attached. When the checkbox
is deselected, only the message is sent.
Image file name
Type the file name you want to assign to the image to be
attached to an e-mail. You can use up to 10
alphanumeric characters, – (hyphen) and _ (underscore)
for naming.
The actual image file name will be the specified image
file name with a suffix and the extension .jpg.
Action output Menu — Setting the Action output
55