Logging In To System; Logging In As A User; About Viewers - Sony IPELA SNC-VM772R User Manual

Logging in to System

Logging in as a user

1
Start the Web browser on your computer and type
the IP address of the camera you want to monitor.
The live viewer is displayed.
Display sample:
Note
If the live viewer does not start correctly, the security
level of the Internet Explorer may be set to higher than
Medium. See "To display the viewer correctly" on
page 7 and check the security level.

About Viewers

You can use the following viewers.
ActiveX viewer
This viewer can monitor the camera image in any of the
JPEG and H.264 video codecs.
Two types of ActiveX viewer are available: Live viewer
and Playback viewer.
You must install this viewer when you access the viewer
for the first time.
Notes
• If a part of the image does not fit in the screen, set the
display setting of the computer to 100%.
• If the images are not smoothly displayed, match the
video frequency setting and the refresh rate of the
computer screen.
When you display the viewer of the camera for
the first time
When you access the network camera using ActiveX
viewer for the first time, the Security Warning appears.
Click Yes and install ActiveX Control. You can use all
the functions of the viewer with ActiveX Control.
Plug-in free viewer
This viewer enables a browser other than Internet
Explorer to display images.
Notes
• If Automatic configuration is enabled in the Local
Area Network (LAN) Settings of Internet Explorer,
the camera image may not be displayed. In that case,
disable Automatic configuration and set the proxy
server manually. For the setting of the proxy server,
consult your network administrator.
• When you install ActiveX Control, you should be
logged in to the computer as the Administrator.
• When you start Internet Explorer, run as
"Administrator."
Tip
Every page of this software is optimized for Internet
Explorer in Medium font.
11
Logging in to System