Resetting - Mercedes-Benz 2015 M-Class Operator's Manual

Sliding sunroof
100
If somebody becomes trapped:
release the switch immediately, or
R
during automatic operation, push the
R
switch briefly in any direction
The closing process is stopped.
Opening and closing the roller sun-
blinds
Overhead control panel
To open
:
To open
;
To close
=
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Press or pull the 2 switch in the corre-
X
sponding direction.
i
If you press/pull the 2 switch beyond
the point of resistance, automatic opera-
tion is started in the corresponding direc-
tion. You can stop automatic operation by
pressing/pulling the switch again.
Resetting the panorama roof with
power tilt/sliding panel and the roller
sunblinds
! If the panorama roof with power tilt/slid-
ing panel and the roller sunblinds cannot be
fully opened or closed after resetting, con-
tact a qualified specialist workshop.
Overhead control panel
To open
:
To open
;
To close
=
Reset the panorama roof with power tilt/slid-
ing panel and the roller sunblinds if the pan-
orama roof with power tilt/sliding panel or
the roller sunblinds do not move smoothly.
Turn the SmartKey to position 1 or 2 in the
X
ignition lock.
Pull the 2 switch repeatedly to the point
X
of resistance in the direction of arrow =
until the panorama roof with power tilt/
sliding panel is fully closed.
Keep the 2 switch pulled for an addi-
X
tional second.
Pull the 2 switch repeatedly to the point
X
of resistance in the direction of arrow =
until the roller sunblinds are fully closed.
Keep the 2 switch pulled for an addi-
X
tional second.
Make sure that the panorama roof with
X
power tilt/sliding panel (
roller sunblinds (
Y
opened again.
If this is not the case, repeat the steps
X
above again.
page 99) and the
Y
page 100) can be fully