Mercedes-Benz 2015 M-Class Operator's Manual page 340

Stowage areas
338
wards, e.g. when braking suddenly or in the
event of an accident.
The vehicle occupant would thereby be
R
pushed into the seat belt by the rear bench
seat/rear seat or by the seat backrest. The
seat belt can no longer offer the intended
level of protection and could even cause
injuries.
Objects or loads in the trunk/cargo com-
R
partment cannot be restrained by the seat
backrest.
There is an increased risk of injury.
Before every trip, make sure that the seat
backrests and the rear bench seat/rear seat
are engaged.
! Fold the seat cushion upwards before
folding the rear bench seat forward. Other-
wise, the backrests may be damaged.
When the backrest is folded forwards, the
front seats should not be moved to their
rearmost position. Otherwise, the front
seats and the rear bench seat could be
damaged.
Observe the loading guidelines (
The left-hand and right-hand rear seat backr-
ests can be folded forwards separately to
increase the cargo compartment capacity.
Folding the rear bench seat forwards
! The backrest is heavy. Therefore, take
care when folding it down. Make sure that
the head restraints are pushed all the way
in so that the backrests and seat cushions
are not damaged.
i If the driver's or front-passenger seat is
set for a larger person, it may not be pos-
sible to fold the rear bench seat forwards.
In this case, move the front seats as far
forward as possible.
Move the head restraints to the lowest
X
position (
Fold seat cushion : upwards.
X
Pull release handle ; upwards in the direc-
X
tion of the arrow until the backrest is fully
released.
Fold the backrest forwards until it reaches
X
the cargo compartment position.
page 334).
Y
Guide seat belts ; under respective
X
clips :.
page 108).
Y